API 5L X56 Pipe

TABLE OF CONTENT

1. API 5L X56 PSL1 Pipes / API 5L X56 PSL2 Pipes Manufacturer, Supplier, Exporter & Stocklist in UAE – Triosteel
2. What does API 5L stand for?
3. Why Triosteel for API 5L X56 Pipes?
4. API 5L X56 PSL1/PSL2 Pipe Grade, Chemical Composition and Mechanical Requirements
5. API 5L PSL1 AND API 5L PSL2 Seamless Pipes Dimensions
6. API 5L PSL1 AND API 5L PSL2 LSAW Pipes Dimensions
7. API 5L X56 PSL1 pipes Supplier and API 5L X56 PSL2 pipes Manufacturer, API 5L X56 PSL1 / PSL2 pipes, best price API 5L X56 Seamless pipes, high-quality API 5L X56 PSL1 / PSL2 Seamless pipes, buy API 5L X56 PSL2 Seamless pipe from Stocklist, API 5L X56 PSL1 / PSL2 LSAW pipe, carbon steel Seamless API 5L X56 PSL1 / PSL2 pipe Supplier in UAE– Triosteel
8. applications OF API 5L X56 pipes
9. carbon steel pipes tubes inventory at a glance
10. Availability of API 5L X56 PSL1 pipes, API 5L X56 PSL2 pipes, API 5L X56 Seamless pipes, API 5L X56 LSAW pipes, API 5L X52 DSAW pipes, ETC.
11. API 5L X56 pipes Manufacturer AND Exportera – Triosteel

API 5L X56 PSL1 PIPES / API 5L X56 PSL2 PIPES MANUFACTURER, SUPPLIER, EXPORTER & STOCKIST IN UAE – TRIOSTEEL

Triosteel supplies and stocks a full range of API 5L X56 PSL1 Pipes and API 5L X56 PSL2 Pipes. We are an exporter and supplier of API 5L X56 Pipe in UAE. All products we supply are conforming to industry standards or exceed API, ASTM, ASME, ANSI, and other national and international standards.


They are independently covered so the exceptional nature of the material is held and there are no harms in the last phases of its creation.
These pipes accompany engraves pertinent to the gig data (for instance heat number, size, material, and part number). This data is additionally printed along all to whom lines are conveyed.
Your requirement for API 5L X56 PSL1 Pipes or API 5L X56 PSL2 Pipes of standard length and width lines and tubing closes here. In the event that you want high strength, high tractable, weighty divider line pipe necessities for profound acrid wells, penetrating, seaward boring and creation, icy investigation and creation, or you really want API 5L X56 PSL1 Pipes for flammable gas, oil, or water transport, then Trio Steel can fulfill the needs of your organization.
These pipes (upgraded) are high return consistent line that is changed to suit offshore primary purposes. These pipes are planned for (yet not restricted to) use in fixed offshore constructions and are intended to work in the seaward area. Trio Steel is the main API 5L X56 PSL1 Pipes Manufacturer, Supplier, Exporter, and Stockist. We are likewise an API 5L X56 Pipes Manufacturer, Suppliers, Exporter, and Stockist with north of 800-ton stock in carbon steel seamless pipe tubes.

Show more
Show less

WHAT DOES API 5L STAND FOR?

One of the criteria for determining the API 5l pipe quality is the “API” trademark. API or American Petroleum Institute, the largest petroleum and natural gas industry organization of the United States, has given some particular policies for the transportation of oil, water, and gas. API 5L PSL1 is a Product Specification Levels 1 pipe as per the American Petroleum Institute specification.The API 5L Pipes check all the boxes on these guidelines and hence, they are believed by consumers, thus it makes Trio Steel a leading API 5L Pipes Supplier & also API 5L Pipes Manufacturer.These pipes are used in the transportation system. The main purpose of these pipes is to transport products such as Natural gas, Petroleum, Water, and Oil from one place to another.

WHY TRIO STEEL FOR API 5L X56 PIPES?

Trio Steel, an API 5L X56 Pipes supplier, and manufacturer, comes in accordance with the International Organization for Standardization ISO 3183 and it expresses the generation of two item particular levels (PSLs): PSL1 and PSL 2. The earlier is a standard quality for line pipe however the last conveys extra mechanical, engineered characteristics, and testing codes. These pipes are trusted items for some organizations that are serving in the oil, combustible gas, and petroleum in API 5L Pipes across numerous areas similarly as various locales and that is in the same place as our organization which is the supplier and manufacturer of API 5L PSL1 Pipes and API 5L PSL2 Pipes comes into the image.


With the progression of OCTG pipeline steel and its welded pipe composting and welding innovation are redesigned, welded pipe for line pipe reasonably broadened the extent of utilization, especially in a cosmically monstrous width welded pipe inside the gatherings, the advantages are more out wet, in addition to the expense angle is directing occupied with pipelines, decreases the improvement of hardened steel pipes. API 5L Pipes manufacturers are furthermore perceived as Ebony steel pipe and are generally utilized for oil boring purposes likewise, the consent of API 5L pipe is augmenting because of its expense adequacy and strength, it is effortless to weld and the cost of API 5L X56 Seamless pipe is 20% more connected with API 5L X56 pipe. Assuming that a laborer is to induce an API 5L Pipe, the development interaction ensnared could be one of two strategies for example – cold drawing or hot finishing. Cold drawing is a method used to make pipes by drawing them or molding the pipe or cylinder at room temperature.
Henceforth our organization which is API 5L Pipes providers have gotten has enormously expanded and to satisfy these necessities, we at Trio Steel have fostered a tremendous scope of API 5L X56 Pipes that are sensible to satisfy the various needs of the business while utilizing the API 5L pipes. The API 5L extent of pipes available at Trio Steel is different so much that they can help a wide scope of business applications in various undertakings. Here you get API 5L X56 Pipes, API 5L X56 Pipes, API 5L X65 Pipes, API 5L X56 Pipes, API 5L X42 Pipes, API 5L X60 Pipes, API 5L X70 Pipes, API 5L X80 Pipes, API 5L X100 Pipes, API 5L X120 Pipes and API 5L Grade B pipes in DSAW (Double Submerged Arc Welded), ERW (Electric Resistance Welded), and LSAW (Longitudinal Submerged Arc-Welding) areas. These API 5L pipes encase the various subtleties and estimations that organizations look for while buying the API 5L pipes.

Show more
Show less

API 5L X56 PIPES GRADE, CHEMICAL COMPOSITION, AND MECHANICAL REQUIREMENTS

Grade: API 5L X56 PSL1 Pipe

  • X
  • The x symbol followed by a two or three digit number equal to the specified minimum yields strength in 1000 psi rounded down to the nearest integer.
  • Minimum Yield
  • At pipe body 290 MPa (42,100 psi)
  • Delivery Condition
  • +N Normalizing rollingQ Quenched and tempered
    where +Q refers to a heat treatment
    process consisting of quench
    hardening followed by tempering
  • PSL
  • PSL refers to product specification level,
    where PSL 1 mentions the minimum mechancial requirement

Applicable codes and standards
 API 5L, 45th Edition / ISO 3183 
Specification for line pipe – technical delivery conditions. 

Size: ¼” to 36”
 Wall Thickness: SCH 10 to 160, STD, XS, XXS
 Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
 0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
 the products.

CHEMICAL COMPOSITION OF API 5L X56 PSL1 PIPES
C Si MN P S V Nb Ti Other Carbon Equivalent
Max (b) Max Max (b) Max Max Max Max Max % maximum
CE(IIW) CE(Pcm)
0.26 – 1.30 0.030 0.030 (d) (d) (d) (a) – –

 

MECHANICAL REQUIREMENT OF API 5L X56 PSL1 PIPES
Tensile Requirements on Pipe body of welded pipes Ratio Elongation CVN Absorbed Energy Heat Treatment
Yield Strength (R10.5) Tensile Strength (R) R 10.5/ R % 0 degree celsius
PSI Mpa PSI Mpa Max Minimum Min J Min ft. lb Wield Seam Normalizing
42,100 min 290 min 60,200 min 415 min –   – –
             

 

IMPACT TEST OF API 5L X56 PSL1 PIPES  
AVG ABSORBED ENERGY IND. ABSORBED ENERGY  
MIN (JOULES) MIN (JOULES)  
27 20

 

Notes:

  1. 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum. For grades up to and including X56, Cu, Cr, and Ni shall not be added intentionally.
  2. For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese in permissible, up to a maximum of 1.65% for grades ≥ B, but ≤ X56; up to a maximum of 1.75% for grades > X56
  3. Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
  4. The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
  5. Unless otherwise agreed.
  6. Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
  7. Unless otherwise agreed, 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum.
  8. Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
  9. Unless otherwise agreed, 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum.

 

Other Details

Surface

  1. All surfaces have been 100% visually inspected. The surface condition complies with API 5L standards.
  2. External surface of the pipe shall be coated with a layer of varnish.

NDT

All pipes will be ultrasonic tested on pipe body and pipe end as per API 5L standards

  1. longitudinal: 100% of the pipe surface
  2. pipe ends not scanned by the automatic ultrasonic system shall be inspected by manual UT or Magnetic Particle Examination.

 

Certification and Traceability

All dimensions will be supplied with a 3.2 certificate according to EN 10204, endorsed by a recognized and independent inspection agency. Marking shall be in SI units (X56) in accordance with API requirements & mill standards.

Dimensional Control

All dimensions will be supplied according to API 5L clause 9.11; In addition, the following tolerances apply:

  1. Pipe body: +/- 0,75%
  2. Pipe end: +/- 0,5%
  3. Wall thickness: +15%, -12,5%
  4. Length: -0 / +100mm

 

Pipe Ends

Pipe Ends are beveled. The end angle shall be 30°- 0°/+5°, root face shall be 1.6mm +/- 0.8mm and fitted with bevel protectors.

Protection

Pipes are varnished on the outside.

Grade: API 5L X56 PSL2 Pipe

  • X
  • The x symbol followed by a two or three digit number equal to the specified minimum yields strength in 1000 psi rounded down to the nearest integer.
  • Minimum Yield
  • At pipe body 290 MPa (42,100 psi)
  • Delivery Condition
  • +N Normalizing rollingQ Quenched and tempered
    where +Q refers to a heat treatment
    process consisting of quench
    hardening followed by tempering
  • PSL
  • PSL refers to product specification level,
    where PSL 2 provides a more extensive chemical composition complete with a mandatory minimum fracture toughness

Applicable codes and standards
 API 5L, 45th Edition / ISO 3183 
Specification for line pipe – technical delivery conditions. 

Size: ¼” to 36”
 Wall Thickness: SCH 10 to 160, STD, XS, XXS
 Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
 0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
 the products.

CHEMICAL COMPOSITION OF API 5L X56 PSL2 PIPES
C Si MN P S V Nb Ti Other Carbon Equivalent
Max (b) Max Max (b) Max Max Max Max Max % maximum
CE(IIW) CE(Pcm)
0.22 0.45 1.30/ 0.025 0.015 0.05 0.05 0.04 (g) 0.43 0.25

 

MECHANICAL REQUIREMENT OF API 5L X56 PSL2 PIPES
Tensile Requirements on Pipe body of welded pipes Ratio Elongation CVN Absorbed Energy Heat Treatment
Yield Strength (R10.5) Tensile Strength (R) R 10.5/ R % 0 degree celsius
PSI Mpa PSI Mpa Max Minimum Min J Min ft. lb Wield Seam & HAZ Normalizing
42,100-71,800 290-495 60,200-110,200 415-760 0.93 – –

 

IMPACT TEST OF API 5L X56 PSL2 PIPES
AVG ABSORBED ENERGY IND. ABSORBED ENERGY
MIN (JOULES) MIN (JOULES)
27 20

Notes:

    1. 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum. For grades up to and including X56, Cu, Cr and Ni shall not be added intentionally.
    1. For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese in permissible, up to a maximum of 1.65% for grades ≥ B, but ≤ X56; up to a maximum of 1.75% for grades > X56, but
    1. Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
    1. The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
    1. Unless otherwise agreed.
    1. Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
    1. Unless otherwise agreed, 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum.
    1. Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
    1. Unless otherwise agreed, 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum.

 

Other details

Surface

    1. All surfaces have been 100% visually inspected. The surface condition complies with API 5L standards.
    1. External surface of pipe shall be coated with a layer of varnish.

NDT

All pipes will be ultrasonic tested on pipe body and pipe end as per API 5L standards:

    1. longitudinal: 100% of the pipe surface
    1. pipe ends not scanned by automatic ultrasonic system shall be inspected by manual UT or Magnetic Particle Examination.

 

Certification and traceability

All dimensions will be supplied with a 3.2 certificate according to EN 10204, endorsed by recognized and independent inspection agency. Marking shall be in SI units (X56) accordance with API requirements & mill standard.

 

Dimensional control

All dimensions will be supplied according to API 5L clause 9.11; In addition, the following tolerances apply:

    1. Pipe body: +/- 0,75%
    1. Pipe end: +/- 0,5%
    1. Wall thickness: +15%, -12,5%
    1. Length: -0 / +100mm

Pipe Ends

Pipe Ends are beveled. The end angle shall be 30°- 0°/+5°, root face shall be 1.6mm +/- 0.8mm and fitted with bevel protectors.

Protection

Pipes are varnished on the outside.

API 5L PSL1 AND API 5L PSL2 SEAMLESS PIPES DIMENSIONS:

Nominal Pipe Size OD (mm) Wall Thickness (mm) Grade Qty (Mtr)
1” 33.4 3.38 API 5L GR B Seamless Pipe 254.50
1” 33.4 3.38 API 5L X52 Seamless Pipe 305.60
1” 33.4 3.38 API 5L X60 Seamless Pipe 314.80
1” 33.4 3.38 API 5L X80 Seamless Pipe 200.00
1” 33.4 4.55 API 5L X42 Seamless Pipe 405.40
1” 33.4 4.55 API 5L X60 Seamless Pipe 390.00
1” 33.4 4.55 API 5L X70 Seamless Pipe 100.50
1” 33.4 6.35 API 5L X46 Seamless Pipe 200.40
1” 33.4 6.35 API 5L X52 Seamless Pipe 95.40
1” 33.4 9.09 API 5L X52 Seamless Pipe 22.50
1” 33.4 9.09 API 5L X70 Seamless Pipe 100.50
2” 60.3 3.91 A 53/API 5L X42 Seamless Pipe 124.50
2” 60.3 3.91 API 5L X52 Seamless Pipe 90.00
2” 60.3 3.91 API 5L X60 Seamless Pipe 75.50
2” 60.3 3.91 API 5L X70 Seamless Pipe 110.50
2” 60.3 5.54 A 53/API 5L X42 Seamless Pipe 120.50
2” 60.3 5.54 API 5L X52 Seamless Pipe 160.40
2” 60.3 5.54 API 5L X60 Seamless Pipe 60.50
2” 60.3 5.54 API 5L X65 Seamless Pipe 17.50
2” 60.3 8.74 API 5L X52 Seamless Pipe 74.50
2” 60.3 8.74 API 5L X60 Seamless Pipe 120.50
2” 60.3 8.74 API 5L X65 Seamless Pipe 110.00
2” 60.3 11.07 API 5L X52 Seamless Pipe 114.30
2” 60.3 11.07 API 5L X60 Seamless Pipe 120.50
2” 60.3 11.07 API 5L X65 Seamless Pipe 74.50
3″ 88.9 15.24 API 5L X65 Seamless Pipe 186.00
4″ 114.3 6.02 API 5L X65 Seamless Pipe 89.55
4″ 114.3 8.56 API 5L X52 Seamless Pipe 60.50
4″ 114.3 8.56 API 5L X60 Seamless Pipe 36.50
4″ 114.3 13.49 API 5L X65 Seamless Pipe 70.50
4″ 114.3 17.12 API 5L X52 Seamless Pipe 55.40
4″ 114.3 17.12 API 5L X60 Seamless Pipe 18.40
5″ 141.3 12.70 API 5L X65 Seamless Pipe 65.50
5″ 141.3 9.53 API 5L X65 Seamless Pipe 34.50
5″ 141.3 19.05 API 5L X60 Seamless Pipe 33.66
5″ 141.3 19.05 API 5L X70 Seamless Pipe 205.00
6″ 168.3 7.11 API 5L X52 Seamless Pipe 174.50
6″ 168.3 7.11 API 5L X56 Seamless Pipe 66.60
6″ 168.3 7.11 API 5L X60 Seamless Pipe 105.50
6″ 168.3 7.11 API 5L X70 Seamless Pipe 198.60
6″ 168.3 7.11 API 5L X80 Seamless Pipe 202.50
` 168.3 10.97 API 5L X65 Seamless Pipe 905.40
6″ 168.3 18.26 A53B/API 5L X42 Seamless Pipe 208.60
6″ 168.3 18.26 API 5L X52 Seamless Pipe 83.51
6″ 168.3 21.95 API 5L X65 Seamless Pipe 455.60
6” 168.3 21.95 API 5L X60 Seamless Pipe 226.10
6” 168.3 21.95 API 5L X70 Seamless Pipe 804.60
8″ 219.1 18.26 API 5L X70 Seamless Pipe 11.95
8″ 219.1 18.26 API 5L X65 Seamless Pipe 14.90
8″ 219.1 21.59 API 5L X65 Seamless Pipe 20.50
8″ 219.1 22.23 API 5L X52 Seamless Pipe 18.30
8″ 219.1 23.01 API 5L X65 Seamless Pipe 91.57
8″ 219.1 25.96 API 5L X60 Seamless Pipe 151.30
8″ 219.1 27.94 API 5L X65 Seamless Pipe 31.30
8″ 219.1 29.41 API 5L X70 Seamless Pipe 35.90
10″ 273 17.70 API 5L X65 Seamless Pipe 11.95
10″ 273 21.44 API 5L X52 Seamless Pipe 12.60
10″ 273 25.40 API 5L X65 Seamless Pipe 18.60
12″ 323.8 12.70 API 5L X65 Seamless Pipe 340.15
12″ 323.8 19.05 API 5L X60 Seamless Pipe 91.57
12″ 323.8 19.05 API 5L X65 Seamless Pipe 311.03
12″ 323.8 19.05 API 5L X65 Seamless Pipe 101.19
12″ 323.8 20.60 API 5L X65 Seamless Pipe 175.50
12″ 323.8 20.62 API 5L X65 Seamless Pipe 224.00
12″ 323.8 21.59 API 5L X65 Seamless Pipe 35.35
12″ 323.8 23.80 API 5L X65 Seamless Pipe 11.99
12″ 323.8 25.40 API 5L X65 Seamless Pipe 13.10
12″ 323.8 33.32 API 5L X52 Seamless Pipe 14.20
14″ 355.6 15.09 SA333-G6 Seamless Pipe 18.40
14″ 355.6 19.05 API 5L X52 Seamless Pipe 24.40
14″ 355.6 22.23 API 5L X65 Seamless Pipe 42.80
14″ 355.6 23.83 API 5L X52 Seamless Pipe 66.40
14″ 355.6 27.79 API 5L X65 Seamless Pipe 78.30
16″ 406.4 19.05 API 5L X65 Seamless Pipe 59.90
16″ 406.4 21.44 API 5L X65 Seamless Pipe 36.50
16″ 406.4 26.19 API 5L X65 Seamless Pipe 121.10
16″ 406.4 30.96 API 5L X52 Seamless Pipe 144.90
18″ 457.2 19.05 API 5L X52 Seamless Pipe 40.50
18″ 457.2 20.62 API 5L X70 Seamless Pipe 18.90
18″ 457.2 23.83 API 5L X56 Seamless Pipe 60.00
18″ 457.2 34.93 SA106/API 5L X42 Seamless Pipe 43.30
18″ 457.2 39.67 A106 Seamless Pipe 30.60
18″ 457.2 45.24 SA106/API 5L X42 Seamless Pipe 26.50
20″ 508 20.62 ASTM A106 Seamless Pipe 12.70
20″ 508 26.19 API 5L X70 Seamless Pipe 24.00
20″ 508 32.54 API 5L X70 Seamless Pipe 6.10
20″ 508 44.45 SA106/API 5L X42 Seamless Pipe 6.60
20″ 508 50.01 SA106/API 5L X42 Seamless Pipe 18.70
24″ 609.6 24.61 A106 Seamless Pipe 100.40
24″ 609.6 30.96 API 5L X80 Seamless Pipe 18.10
24″ 609.6 38.89 API 5L X42 Seamless Pipe 24.80
24″ 609.6 46.02 SA106/API 5L X42 Seamless Pipe 11.56
24″ 609.6 52.37 SA106/API 5L X42 Seamless Pipe 10.00
24″ 609.6 59.51 SA106/API 5L X42 Seamless Pipe 12.00
24″ 609.6 63.50 API 5L X42 Seamless Pipe 6.00
26″ 660.4 9.53 API 5L X42 Seamless Pipe 12.50

API 5L PSL1 AND API 5L PSL2 LSAW PIPES DIMENSIONS:

Nominal Pipe Size OD (mm) Wall Thickness (mm) Grade Qty (Mtr)
16″ 406.4 9.53 A53B/API 5L X42 LSAW PIPE 88.90
16″ 406.4 12.70 A53B/API 5L X42 LSAW PIPE 213.50
18″ 457.2 9.53 API 5L X42 LSAW PIPE 118.50
18″ 457.2 12.70 A53B/API 5L X42 LSAW PIPE 90.50
20″ 508 12.70 API 5L X70 LSAW PIPE 30.50
22″ 558.8 12.70 A53B/API 5L X42 LSAW PIPE 21.40
24″ 609.6 14.27 API 5L X60 LSAW PIPE 42.60
24″ 609.6 15.88 API 5L X65 LSAW PIPE 24.50
24″ 609.6 22.66 API 5L X60 LSAW PIPE 8.50
24″ 609.6 25.40 API 5L X60 LSAW PIPE 105.40
24″ 609.6 26.75 API 5L X65 LSAW PIPE 12.60
24″ 609.6 28.63 API 5L X65 LSAW PIPE 48.88
24″ 609.6 30.48 API 5L X65 LSAW PIPE 60.40
24″ 609.6 31.17 API 5L X65 LSAW PIPE 108.90
24″ 609.6 38.10 API 5L X52 LSAW PIPE 24.90
28″ 711.2 9.53 A53B/API 5L X42 LSAW PIPE 11.80
28″ 711.2 9.53 API 5L X60 LSAW PIPE 25.40
28″ 711.2 15.87 API 5L X52 LSAW PIPE 30.50
28″ 711.2 15.87 API 5L X60 LSAW PIPE 36.60
28″ 711.2 19.05 API 5L X70 LSAW PIPE 60.00
28″ 711.2 19.05 API 5L X80 LSAW PIPE 12.00
28″ 711.2 25.40 API 5L X52 LSAW PIPE 90.50
28″ 711.2 31.25 API 5L X70 LSAW PIPE 24.90
30″ 762 9.53 API 5L X52 LSAW PIPE 30.20
30″ 762 9.53 API 5L X60 LSAW PIPE 24.70
30″ 762 9.53 API 5L X70 LSAW PIPE 18.30
30″ 762 15.87 API 5L X52 LSAW PIPE 15.50
30″ 762 15.87 API 5L X80 LSAW PIPE 20.20
36″ 914.4 9.53 API 5L X65 LSAW PIPE 122.60
36″ 914.4 9.53 API 5L X70 LSAW PIPE 78.30
36″ 914.4 9.53 API 5L X80 LSAW PIPE 90.50
36″ 914.4 12.70 API 5L X60 LSAW PIPE 175.50
36″ 914.4 12.70 API 5L X52 LSAW PIPE 90.00
36″ 914.4 12.70 API 5L X70 LSAW PIPE 90.50
36″ 914.4 13.61 API 5L X70 LSAW PIPE 42.50
36″ 914.4 20.62 API 5L X60 LSAW PIPE 9.50
36″ 914.4 23.83 API 5L X52/X56 LSAW PIPE 24.00
36″ 914.4 25.40 API 5L X70 LSAW PIPE 30.50
36″ 914.4 25.40 API 5L X80 LSAW PIPE 36.50
36″ 914.4 31.80 API 5L X70 LSAW PIPE 70.50


API 5L X56 PSL1 PIPES SUPPLIER AND API 5L X56 PSL2 PIPES MANUFACTURER, API 5L X56 PSL1 / PSL2 PIPES, BEST PRICE API 5L X56 SEAMLESS PIPES, HIGH-QUALITY API 5L X56 PSL1 / PSL2 SEAMLESS PIPES, BUY API 5L X56 PSL2 SEAMLESS PIPEFROM STOCKIST, API 5L X56 PSL1 / PSL2LSAW PIPE, CARBON STEEL SEAMLESS API 5L X56 PSL1 / PSL2 PIPE SUPPLIERINUAE

Triosteel is one of the main API 5L X56 Pipes Suppliers and API 5L X56 Pipes Manufacturers, our adage is to ensure that our clients get the best pipes for the best nature of their activities. API 5L X56 Pipes are the most important device in different associations across the business. You can purchase the API 5L X56 Pipes, API 5L X56 SEAMLESS PIPES, AND API 5L X56 LSAW PIPES at the best costs from Trio Steel. Our image demonstrates quick conveyance, minimal expense, and top-caliber of API 5L X56 PSL1 Pipes and API 5L X56 PSL2 Pipes and Trio Steel is a brand that many individuals trust. We are here for a long time; thus, we have all the experience expected to give the Best API 5L X56 PIPES and we are viewed as UAE’s top API 5L X56 PIPE Suppliers and API 5L X56 PIPE Manufacturers.

APPLICATIONS OF API 5L X56 PIPES:

The whole range of API 5L X56 PIPES has various applications in different fields. X56 Pipeis a type of pipe that is used conveying oil and gas materials over long distances.API 5L X56 Pipe is just one of the many grades that are available within this specification. Some of the applications of API 5L X56 PIPES are:

        • Petrochemicals
        • Oil Refineries
        • Pressure Vessels
        • Power Generation
        • Boiler Equipment

CARBON STEEL PIPES TUBES INVENTORY AT A GLANCE

Here is a list of the inventory of Carbon Steel Pipes:

-> Seamless Pipes

    • ASTM A106 GR B Seamless Pipes
    • ASTM A333 GR 6 Seamless Pipes
    • ASTM A53 B Seamless Pipes
    • ISO 3183 L245/L290/L320/L360/L415/L450/L485/L555 Seamless Pipes
    • ISO 3183 L245/L290/L320/L360/L415/L450/L485/L555 Seamless Pipes
    • ST 52 Seamless Pipes
    • S355/S420/S460 Seamless Pipes

(In this you have variations like NACE MR0175, HIC, SSC, 3.2 Certification)

-> Welded Pipes

    • ASTM A106 GR B Welded Pipes
    • ASTM A333 GR 6 Welded Pipes
    • API 5L GR B PSL1 / PSL2 Welded Pipes; API 5L X42 PSL1/ PSL2 Welded Pipes; API 5L X46PSL1/ PSL2 Welded Pipes; API 5L X52 PSL1 / PSL2 Welded Pipes; API 5L X56 PSL1 / PSL2 Welded Pipes; API 5L X60 PSL1 / PSL2 Welded Pipes; API 5L X65 PSL1/ PSL2 Welded Pipes;API 5L X70 PSL1 / PSL2 Welded Pipes; API 5L X80 PSL1 / PSL2 Welded Pipes; API 5L X100 PSL1 / PSL2 Welded Pipes; API 5L X120 PSL1/PSL2 Welded Pipes
    • API 5L GR B/X42/X46/X52/X56/X60/X65/X70/X80/X100/X120 PSL1/PSL2 LSAW Pipes
    • API 5L GR B/X42/X46/X52/X56/X60/X65/X70/X80/X100/X120 PSL1/PSL2 DSAW Pipes
    • ASTM A671/ASTM A672 CC60/CC65/CC70 CL12/CL22/CL32 EFW PIPES
    • ISO 3183 L245/L290/L320/L360/L415/L450/L485/L555 Welded Pipes
    • ISO 3183 L245/L290/L320/L360/L415/L450/L485/L555 LSAW Pipes
    • ST52 Welded Pipes S355/S420/S460 Welded Pipes

AVAILABILITY OF API 5L X56 PSL1 PIPES, API 5L X56 PSL2 PIPES, API 5L X56 SEAMLESS PIPES, API 5L X56 LSAW PIPES, API 5L X56 DSAW PIPES:

We at Trio Steel are the leading API 5L X56 Pipes Supplier and also the API 5L X56 Pipes Manufacturer. We supply and stock a full range of API 5L X56 PSL1 / PSL2 Pipes. All products we supply are conforming to industry standards or exceed national and international standards.

They are individually covered so that the premium quality of the material is retained and there are no damages in the last stages of its production.

These pipes come with imprints relevant to the job information (for example heat number, size, material, and part number). This information is also printed along all to whom pipes are delivered. Hence, we have all the various types of API 5L X56 Pipes available. This list includes:

    1. API 5L X56 PSL1 PIPES
    2. API 5L X56 PSL2 PIPES
    3. API 5L X56 SEAMLESS PIPES
    4. API 5L X56 LSAW PIPES
    5. API 5L X56 DSAW PIPES
    6. API 5L X56 HIC TESTED PIPES
    7. API 5L X56 SSC TESTED PIPES
    8. API 5L X56 NACE MR0175 PIPES
    9. API 5L X56 3.2 CERTIFIED PIPES


API 5L X56 PIPES MANUFACTURERS AND EXPORTERS – TRIO STEEL

Our top notch of API 5L X56 Seamless Pipes, reasonable client administration, and in-house API 5L X56 Pipes handling abilities have made us one of the arising and driving providers for API 5L X56 PSL1 / PSL2 Pipes. Our API 5L Seamless Pipes region unit traded much of the time to north of Fifty-three nations. In the course of the most recent decade, we tend to had prepared over 2400+ a lot of Carbon Steel API 5L X56 Seamless Pipes to various nations. 

 SOME OF THE COUNTRIES WE EXPORT TO

API 5L X56 PIPES in Brazil API 5L X56 PIPES in Germany API 5L X56 PIPES in Indonesia API 5L X56 PIPES in Singapore
API 5L X56 PIPES in Thailand  API 5L X56 PIPES in Malaysia API 5L X56 PIPES in Iran  API 5L X56 PIPES in Japan
API 5L X56 PIPES in Korea  API 5L X56 PIPES in Oman API 5L X56 PIPES in Qatar  API 5L X56 PIPES in Russia
API 5L X56 PIPES in Saudi Arabia API 5L X56 PIPES in Turkey API 5L X56 PIPES in Vietnam API 5L X56 PIPES in United Kingdom
API 5L X56 PIPES in United Arab Emirates API 5L X56 PIPES in Italy API 5L X56 PIPES in Argentina API 5L X56 PIPES in Colombia