API 5L X42 PIPE

TABLE OF CONTENT

1. API 5L X42 PSL1 Pipes / API 5L X42 PSL2 Pipes Manufacturer, Supplier, Exporter & Stockist in India – Triosteel
2. What does API 5L stand for?
3. Why Triosteel for API 5L X42 Pipes?
4. API 5L X42 PSL1/PSL2 Pipe Grade, Chemical Composition and Mechanical Requirements
5. API 5L PSL1 AND API 5L PSL2 Seamless Pipes Dimensions
6. API 5L X42 PSL1 Pipes Supplier and API 5L X42 PSL2 Pipes Manufacturer, API 5L X42 PSL1 / PSL2 Pipes, Best Price API 5L X42 Seamless Pipes, High-Quality API 5L X42 PSL1 / PSL2 Seamless Pipes, Buy API 5L X42 PSL2 Seamless Pipe from stocklist, API 5L X42 PSL1 / PSL2 LSAW Pipe, Carbon steel Seamless API 5L X42 PSL1 / PSL2 Pipe Supplier in india – Triosteel
7. Applications OF API 5L X42 Pipes
8. Carbon steel Pipes Tubes Inventory at a glance
9. Availability of API 5L X42 PSL1 Pipes, API 5L X42 PSL2 Pipes, API 5L X42 Seamless Pipes, API 5L X42 LSAW Pipes, API 5L X42 DSAW Pipes, ETC.
10. API 5L X42 Pipes Manufacturers AND Exporters – Triosteel

API 5L X42 PSL1 PIPES / API 5L X42 PSL2 PIPES MANUFACTURER, SUPPLIER, EXPORTER & STOCKIST IN INDIA – TRIO STEEL

Trio steel supplies and stocks a full range of API 5L X42 PSL1 Pipes and API 5L X42 PSL2 Pipes. We are an Indian manufacturer of API 5L X42 Pipes. All products we supply are conforming to industry standards or exceed API, ASTM, ASME, ANSI, and other national and international standards.
They are individually covered so that the premium quality of the material is retained and there are no damages in the last stages of its production.These pipes come with imprints relevant to the job information (for example heat number, size, material, and part number). This information is also printed along all to whom pipes are delivered.
Your need for API 5L X42 PSL1 Pipes or API 5L X42 PSL2 Pipes of standard length and diameter pipes and tubing ends here. If you need high strength, high tensile, heavy wall line pipe requirements for deep sour wells, drilling, offshore drilling and production, arctic exploration and production, or you need API 5L X42 PSL1 Pipes for natural gas, oil, or water transport, then Trio Steel can meet the demands of your company.
These pipes (enhanced) are high-yield seamless pipe that is modified to suit offshore structural purposes. These pipes are intended for (but not limited to) use in fixed offshore structures and are designed to operate in the offshore sector. Trio Steel is the leading API 5L X42 PSL1 Pipes Manufacturer, Supplier, Exporter, and Stockist. We are also an API 5L X42 Pipes Manufacturer, Suppliers, Exporter, and Stockist with over 800-ton stock in carbon steel seamless pipe tubes.

WHAT DOES API 5L STAND FOR?

One of the criteria for determining the API 5l pipe quality is the “API” trademark. API or American Petroleum Institute, the largest petroleum and natural gas industry organization of the United States, has given some particular policies for the transportation of oil, water, and gas. API 5L PSL1 is a Product Specification Levels 1 pipe as per the American Petroleum Institute specification. The API 5L Pipes check all the boxes on these guidelines and hence, they are believed by consumers, thus it makes Trio Steel a leading API 5L Pipes Supplier & also API 5L Pipes Manufacturer. These pipes are used in the transportation system. The main purpose of these pipes is to transport products such as Natural gas, Petroleum, Water, and Oil from one place to another.

WHY TRIO STEEL FOR API 5L X42 PIPES?

Trio Steel, an API 5L X42 Pipes supplier, and manufacturer, comes in line with the International Organization for Standardization ISO 3183 and it states the generation of two product specification levels (PSLs): PSL1 and PSL 2. The prior is a standard quality for line pipe though the last conveys additional mechanical, synthetic traits, and testing codes. These pipes are the tried and trusted products for many companies that are serving in the oil, flammable gas, and petrol in API 5L Pipes across many regions just as different regions and that’s where our company which is the supplier and manufacturer of API 5L PSL1 Pipes and API 5L PSL2 Pipes comes into the picture.
With the advancement of OCTG pipeline steel and its welded pipe composting and welding technology are upgraded, welded pipe for line pipe fairly widened the scope of application, particularly in an astronomically immense-diameter welded pipe within the groups, the benefits are more out wet, plus the cost aspect is dictating in the business of pipelines, lessens the development of stainless-steel pipes. API 5L Pipes manufacturers are additionally recognized as Ebony steel pipe and are widely used for oil drilling purposes also, the permission of API 5L pipe is incrementing due to its cost-efficacy and strength, it is facile to weld and the price of API 5L X42 Seamless pipe is 20% more related to API 5L X42 pipe. If a worker is to engender an API 5L Pipe, the formation process implicated could be one of two methods i.e. – cold drawing or sultry culminating. Cold drawing is a technique used to create pipes by drawing them or shaping the pipe or tube at room temperature.
Hence our company which is API 5L Pipes suppliers have received has massively increased and to fulfill these needs, we at Trio Steel have developed a vast range of API 5L X42 Pipes that are reasonable to fulfill the different wants of the industry when using the API 5L pipes. The API 5L scope of lines accessible at Trio Steel is assorted to such a degree that they can assist a wide range of business applications in numerous projects. Over Here you receive API 5L X52 Pipes, API 5L X56 Pipes, API 5L X65 Pipes, API 5L X46 Pipes, API 5L X42 Pipes, API 5L X60 Pipes, API 5L X70 Pipes, API 5L X80 Pipes, API 5L X100 Pipes, API 5L X120 Pipes and API 5L Grade B pipes in DSAW (Double Submerged Arc Welded), ERW (Electric Resistance Welded), and LSAW (Longitudinal Submerged Arc-Welding) sectors. These API 5L pipes enclose the different details and measurements that companies search for while purchasing the API 5L pipes.

API 5L X42 PIPES GRADE, CHEMICAL COMPOSITION, AND MECHANICAL REQUIREMENTS

Grade: API 5L X42 PSL1 Pipe

  • X
  • The x symbol followed by a two or three digit number equal to the specified minimum yields strength in 1000 psi rounded down to the nearest integer.
  • Minimum Yield
  • At pipe body 290 MPa (42,100 psi)
  • Delivery Condition
  • +N Normalizing rollingQ Quenched and tempered
    where +Q refers to a heat treatment
    process consisting of quench
    hardening followed by tempering
  • PSL
  • PSL refers to product specification level,
    where PSL 1 mentions the minimum mechancial requirement

Applicable codes and standards: API 5L, 45th Edition / ISO 3183 1:Specification for line pipe – technical delivery conditions. 

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION OF API 5L X42 PSL2 PIPES
C Si MN P S V Nb Ti Other Carbon Equivalent
Max (b) Max Max (b) Max Max Max Max Max % maximum
CE(IIW) CE(Pcm)
0.22 0.45 1.30/ 0.025 0.015 0.05 0.05 0.04 (g) 0.43 0.25
MECHANICAL REQUIREMENT OF API 5L X42 PSL2 PIPES
Tensile Requirements on Pipe body of welded pipes Ratio Elongation CVN Absorbed Energy Heat Treatment
Yield Strength (R10.5) Tensile Strength (R) R 10.5/ R % 0 degree celsius
PSI Mpa PSI Mpa Max Minimum Min J Min ft. lb Wield Seam & HAZ Normalizing
42,100-71,800 290-495 60,200-110,200 415-760 0.93 – –
IMPACT TEST OF API 5L X42 PSL2 PIPES
AVG ABSORBED ENERGY IND. ABSORBED ENERGY
MIN (JOULES) MIN (JOULES)
27 20

Notes:

          • 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum. For grades up to and including X52, Cu, Cr and Ni shall not be added intentionally.
          • For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese in permissible, up to a maximum of 1.65% for grades ≥ B, but ≤ X52; up to a maximum of 1.75% for grades > X52, but
          • Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
          • The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
          • Unless otherwise agreed.
          • Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
          • Unless otherwise agreed, 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum.
          • Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
          • Unless otherwise agreed, 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum.

Other details

Surface

          • All surfaces have been 100% visually inspected. The surface condition complies with API 5L standards.
          • External surface of pipe shall be coated with a layer of varnish.

NDT

All pipes will be ultrasonic tested on pipe body and pipe end as per API 5L standards:

          • longitudinal: 100% of the pipe surface
          • pipe ends not scanned by an automatic ultrasonic system shall be inspected by manual UT or Magnetic Particle Examination.

Certification and traceability

All dimensions will be supplied with a 3.2 certificate according to EN 10204, endorsed by a recognized and independent inspection agency. Marking shall be in SI units (X42) in accordance with API requirements & mill standards.

Dimensional control

All dimensions will be supplied according to API 5L clause 9.11; In addition, the following tolerances apply:

          • Pipe body: +/- 0,75%
          • Pipe end: +/- 0,5%
          • Wall thickness: +15%, -12,5%
          • Length: -0 / +100mm

Pipe Ends
Pipe Ends are beveled. The end angle shall be 30°- 0°/+5°, the root face shall be 1.6mm +/- 0.8mm and fitted with bevel protectors.

Protection
Pipes are varnished on the outside.

Grade: API 5L X42 PSL2 Pipe

  • X
  • The x symbol followed by a two or three digit number equal to the specified minimum yields strength in 1000 psi rounded down to the nearest integer.
  • Minimum Yield
  • At pipe body 290 MPa (42,100 psi)
  • Delivery Condition
  • +N Normalizing rollingQ Quenched and tempered
    where +Q refers to a heat treatment
    process consisting of quench
    hardening followed by tempering
  • PSL
  • PSL refers to product specification level,
    where PSL 2 provides a more extensive chemical composition complete with a mandatory minimum fracture toughness

Applicable codes and standards
 API 5L, 45th Edition / ISO 3183 
Specification for line pipe – technical delivery conditions. 

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION OF API 5L X42 PSL2 PIPES
C Si MN P S V Nb Ti Other Carbon Equivalent
Max (b) Max Max (b) Max Max Max Max Max % maximum
CE(IIW) CE(Pcm)
0.22 0.45 1.30/ 0.025 0.015 0.05 0.05 0.04 (g) 0.43 0.25
MECHANICAL REQUIREMENT OF API 5L X42 PSL2 PIPES
Tensile Requirements on Pipe body of welded pipes Ratio Elongation CVN Absorbed Energy Heat Treatment
Yield Strength (R10.5) Tensile Strength (R) R 10.5/ R % 0 degree celsius
PSI Mpa PSI Mpa Max Minimum Min J Min ft. lb Wield Seam & HAZ Normalizing
42,100-71,800 290-495 60,200-110,200 415-760 0.93 – –
IMPACT TEST OF API 5L X42 PSL2 PIPES
AVG ABSORBED ENERGY IND. ABSORBED ENERGY
MIN (JOULES) MIN (JOULES)
27 20

Notes:

    • 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum. For grades up to and including X52, Cu, Cr, and Ni shall not be added intentionally.
    • For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese is permissible, up to a maximum of 1.65% for grades ≥ B, but ≤ X52; up to a maximum of 1.75% for grades > X52, but
    • Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
    • The sum of the niobium, vanadium, and titanium concentrations shall be ≤ 0.15%
    • Unless otherwise agreed, the sum of the niobium, vanadium, and titanium concentrations shall be ≤ 0.15%
    • Unless otherwise agreed, 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum.
    • Unless otherwise agreed, the sum of the niobium, vanadium, and titanium concentrations shall be ≤ 0.15%
    • Unless otherwise agreed, 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum.

Other details

Surface

    • All surfaces have been 100% visually inspected. The surface condition complies with API 5L standards.
    • The external surface of the pipe shall be coated with a layer of varnish.

NDT

All pipes will be ultrasonic tested on pipe body and pipe end as per API 5L standards:

    • longitudinal: 100% of the pipe surface
    • pipe ends not scanned by an automatic ultrasonic system shall be inspected by manual UT or Magnetic Particle Examination.

Certification and traceability

All dimensions will be supplied with a 3.2 certificate according to EN 10204, endorsed by a recognized and independent inspection agency. Marking shall be in SI units (X42) in accordance with API requirements & mill standards.

Dimensional control

All dimensions will be supplied according to API 5L clause 9.11; In addition, the following tolerances apply:

    • Pipe body: +/- 0,75%
    • Pipe end: +/- 0,5%
    • Wall thickness: +15%, -12,5%
    • Length: -0 / +100mm

Pipe Ends

Pipe Ends are beveled. The end angle shall be 30°- 0°/+5°, the root face shall be 1.6mm +/- 0.8mm and fitted with bevel protectors.

Protection

Pipes are varnished on the outside.

API 5L PSL1 AND API 5L PSL2 SEAMLESS PIPES DIMENSIONS: 

Nominal Pipe Size OD (mm) Wall Thickness (mm) Grade Qty (Mtr)
1” 33.4 3.38 API 5L GR B Seamless Pipe 254.50
1” 33.4 3.38 API 5L X52 Seamless Pipe 305.60
1” 33.4 3.38 API 5L X60 Seamless Pipe 314.80
1” 33.4 3.38 API 5L X80 Seamless Pipe 200.00
1” 33.4 4.55 API 5L X42 Seamless Pipe 405.40
1” 33.4 4.55 API 5L X60 Seamless Pipe 390.00
1” 33.4 4.55 API 5L X70 Seamless Pipe 100.50
1” 33.4 6.35 API 5L X46 Seamless Pipe 200.40
1” 33.4 6.35 API 5L X52 Seamless Pipe 95.40
1” 33.4 9.09 API 5L X52 Seamless Pipe 22.50
1” 33.4 9.09 API 5L X70 Seamless Pipe 100.50
2” 60.3 3.91 A 53/API 5L X42 Seamless Pipe 124.50
2” 60.3 3.91 API 5L X52 Seamless Pipe 90.00
2” 60.3 3.91 API 5L X60 Seamless Pipe 75.50
2” 60.3 3.91 API 5L X70 Seamless Pipe 110.50
2” 60.3 5.54 A 53/API 5L X42 Seamless Pipe 120.50
2” 60.3 5.54 API 5L X52 Seamless Pipe 160.40
2” 60.3 5.54 API 5L X60 Seamless Pipe 60.50
2” 60.3 5.54 API 5L X65 Seamless Pipe 17.50
2” 60.3 8.74 API 5L X52 Seamless Pipe 74.50
2” 60.3 8.74 API 5L X60 Seamless Pipe 120.50
2” 60.3 8.74 API 5L X65 Seamless Pipe 110.00
2” 60.3 11.07 API 5L X52 Seamless Pipe 114.30
2” 60.3 11.07 API 5L X60 Seamless Pipe 120.50
2” 60.3 11.07 API 5L X65 Seamless Pipe 74.50
3″ 88.9 15.24 API 5L X65 Seamless Pipe 186.00
4″ 114.3 6.02 API 5L X65 Seamless Pipe 89.55
4″ 114.3 8.56 API 5L X52 Seamless Pipe 60.50
4″ 114.3 8.56 API 5L X60 Seamless Pipe 36.50
4″ 114.3 13.49 API 5L X65 Seamless Pipe 70.50
4″ 114.3 17.12 API 5L X52 Seamless Pipe 55.40
4″ 114.3 17.12 API 5L X60 Seamless Pipe 18.40
5″ 141.3 12.70 API 5L X65 Seamless Pipe 65.50
5″ 141.3 9.53 API 5L X65 Seamless Pipe 34.50
5″ 141.3 19.05 API 5L X60 Seamless Pipe 33.66
5″ 141.3 19.05 API 5L X70 Seamless Pipe 205.00
6″ 168.3 7.11 API 5L X52 Seamless Pipe 174.50
6″ 168.3 7.11 API 5L X56 Seamless Pipe 66.60
6″ 168.3 7.11 API 5L X60 Seamless Pipe 105.50
6″ 168.3 7.11 API 5L X70 Seamless Pipe 198.60
6″ 168.3 7.11 API 5L X80 Seamless Pipe 202.50
` 168.3 10.97 API 5L X65 Seamless Pipe 905.40
6″ 168.3 18.26 A53B/API 5L X42 Seamless Pipe 208.60
6″ 168.3 18.26 API 5L X52 Seamless Pipe 83.51
6″ 168.3 21.95 API 5L X65 Seamless Pipe 455.60
6” 168.3 21.95 API 5L X60 Seamless Pipe 226.10
6” 168.3 21.95 API 5L X70 Seamless Pipe 804.60
8″ 219.1 18.26 API 5L X70 Seamless Pipe 11.95
8″ 219.1 18.26 API 5L X65 Seamless Pipe 14.90
8″ 219.1 21.59 API 5L X65 Seamless Pipe 20.50
8″ 219.1 22.23 API 5L X52 Seamless Pipe 18.30
8″ 219.1 23.01 API 5L X65 Seamless Pipe 91.57
8″ 219.1 25.96 API 5L X60 Seamless Pipe 151.30
8″ 219.1 27.94 API 5L X65 Seamless Pipe 31.30
8″ 219.1 29.41 API 5L X70 Seamless Pipe 35.90
10″ 273 17.70 API 5L X65 Seamless Pipe 11.95
10″ 273 21.44 API 5L X52 Seamless Pipe 12.60
10″ 273 25.40 API 5L X65 Seamless Pipe 18.60
12″ 323.8 12.70 API 5L X65 Seamless Pipe 340.15
12″ 323.8 19.05 API 5L X60 Seamless Pipe 91.57
12″ 323.8 19.05 API 5L X65 Seamless Pipe 311.03
12″ 323.8 19.05 API 5L X65 Seamless Pipe 101.19
12″ 323.8 20.60 API 5L X65 Seamless Pipe 175.50
12″ 323.8 20.62 API 5L X65 Seamless Pipe 224.00
12″ 323.8 21.59 API 5L X65 Seamless Pipe 35.35
12″ 323.8 23.80 API 5L X65 Seamless Pipe 11.99
12″ 323.8 25.40 API 5L X65 Seamless Pipe 13.10
12″ 323.8 33.32 API 5L X52 Seamless Pipe 14.20
14″ 355.6 15.09 SA333-G6 Seamless Pipe 18.40
14″ 355.6 19.05 API 5L X52 Seamless Pipe 24.40
14″ 355.6 22.23 API 5L X65 Seamless Pipe 42.80
14″ 355.6 23.83 API 5L X52 Seamless Pipe 66.40
14″ 355.6 27.79 API 5L X65 Seamless Pipe 78.30
16″ 406.4 19.05 API 5L X65 Seamless Pipe 59.90
16″ 406.4 21.44 API 5L X65 Seamless Pipe 36.50
16″ 406.4 26.19 API 5L X65 Seamless Pipe 121.10
16″ 406.4 30.96 API 5L X52 Seamless Pipe 144.90
18″ 457.2 19.05 API 5L X52 Seamless Pipe 40.50
18″ 457.2 20.62 API 5L X70 Seamless Pipe 18.90
18″ 457.2 23.83 API 5L X56 Seamless Pipe 60.00
18″ 457.2 34.93 SA106/API 5L X42 Seamless Pipe 43.30
18″ 457.2 39.67 A106 Seamless Pipe 30.60
18″ 457.2 45.24 SA106/API 5L X42 Seamless Pipe 26.50
20″ 508 20.62 ASTM A106 Seamless Pipe 12.70
20″ 508 26.19 API 5L X70 Seamless Pipe 24.00
20″ 508 32.54 API 5L X70 Seamless Pipe 6.10
20″ 508 44.45 SA106/API 5L X42 Seamless Pipe 6.60
20″ 508 50.01 SA106/API 5L X42 Seamless Pipe 18.70
24″ 609.6 24.61 A106 Seamless Pipe 100.40
24″ 609.6 30.96 API 5L X80 Seamless Pipe 18.10
24″ 609.6 38.89 API 5L X42 Seamless Pipe 24.80
24″ 609.6 46.02 SA106/API 5L X42 Seamless Pipe 11.56
24″ 609.6 52.37 SA106/API 5L X42 Seamless Pipe 10.00
24″ 609.6 59.51 SA106/API 5L X42 Seamless Pipe 12.00
24″ 609.6 63.50 API 5L X42 Seamless Pipe 6.00
26″ 660.4 9.53 API 5L X42 Seamless Pipe 12.50

API 5L PSL1 AND API 5L PSL2 LSAW PIPES DIMENSIONS:

Nominal Pipe Size OD (mm) Wall Thickness (mm) Grade Qty (Mtr)
16″ 406.4 9.53 A53B/API 5L X42 LSAW PIPE 88.90
16″ 406.4 12.70 A53B/API 5L X42 LSAW PIPE 213.50
18″ 457.2 9.53 API 5L X42 LSAW PIPE 118.50
18″ 457.2 12.70 A53B/API 5L X42 LSAW PIPE 90.50
20″ 508 12.70 API 5L X70 LSAW PIPE 30.50
22″ 558.8 12.70 A53B/API 5L X42 LSAW PIPE 21.40
24″ 609.6 14.27 API 5L X60 LSAW PIPE 42.60
24″ 609.6 15.88 API 5L X65 LSAW PIPE 24.50
24″ 609.6 22.66 API 5L X60 LSAW PIPE 8.50
24″ 609.6 25.40 API 5L X60 LSAW PIPE 105.40
24″ 609.6 26.75 API 5L X65 LSAW PIPE 12.60
24″ 609.6 28.63 API 5L X65 LSAW PIPE 48.88
24″ 609.6 30.48 API 5L X65 LSAW PIPE 60.40
24″ 609.6 31.17 API 5L X65 LSAW PIPE 108.90
24″ 609.6 38.10 API 5L X52 LSAW PIPE 24.90
28″ 711.2 9.53 A53B/API 5L X42 LSAW PIPE 11.80
28″ 711.2 9.53 API 5L X60 LSAW PIPE 25.40
28″ 711.2 15.87 API 5L X52 LSAW PIPE 30.50
28″ 711.2 15.87 API 5L X60 LSAW PIPE 36.60
28″ 711.2 19.05 API 5L X70 LSAW PIPE 60.00
28″ 711.2 19.05 API 5L X80 LSAW PIPE 12.00
28″ 711.2 25.40 API 5L X52 LSAW PIPE 90.50
28″ 711.2 31.25 API 5L X70 LSAW PIPE 24.90
30″ 762 9.53 API 5L X52 LSAW PIPE 30.20
30″ 762 9.53 API 5L X60 LSAW PIPE 24.70
30″ 762 9.53 API 5L X70 LSAW PIPE 18.30
30″ 762 15.87 API 5L X52 LSAW PIPE 15.50
30″ 762 15.87 API 5L X80 LSAW PIPE 20.20
36″ 914.4 9.53 API 5L X65 LSAW PIPE 122.60
36″ 914.4 9.53 API 5L X70 LSAW PIPE 78.30
36″ 914.4 9.53 API 5L X80 LSAW PIPE 90.50
36″ 914.4 12.70 API 5L X60 LSAW PIPE 175.50
36″ 914.4 12.70 API 5L X52 LSAW PIPE 90.00
36″ 914.4 12.70 API 5L X70 LSAW PIPE 90.50
36″ 914.4 13.61 API 5L X70 LSAW PIPE 42.50
36″ 914.4 20.62 API 5L X60 LSAW PIPE 9.50
36″ 914.4 23.83 API 5L X52/X56 LSAW PIPE 24.00
36″ 914.4 25.40 API 5L X70 LSAW PIPE 30.50
36″ 914.4 25.40 API 5L X80 LSAW PIPE 36.50
36″ 914.4 31.80 API 5L X70 LSAW PIPE 70.50


API 5L X42 PSL1 PIPES SUPPLIER AND API 5L X42 PSL2 PIPES MANUFACTURER, API 5L X42 PSL1 / PSL2 PIPES, BEST PRICE API 5L X42 SEAMLESS PIPES, HIGH-QUALITY API 5L X42 PSL1 / PSL2 SEAMLESS PIPES, BUY API 5L X42 PSL2 SEAMLESS PIPE FROM STOCKIST, API 5L X42 PSL1 / PSL2 LSAW PIPE, CARBON STEEL SEAMLESS API 5L X42 PSL1 / PSL2 PIPE SUPPLIER IN INDIA

Trio Steel are one of the leading API 5L X42 Pipes Supplier and API 5L X42 Pipes Manufacturer, our motto is to make sure that our clients receive the best pipes for the best quality of their projects. API 5L X42 Pipes are the most valuable tool in multiple organizations across the industry. You can buy the API 5L X42 Pipes, API 5L X42 SEAMLESS PIPES AND API 5L X42 LSAW PIPES at best prices from Trio Steel. Our brand indicates fast delivery, low cost and high quality of API 5L X42 PSL1 Pipes and API 5L X42 PSL2 Pipes and Trio Steel is a brand which many people trust. We are in this space since many years; hence we have all the experience required to provide the Best API 5L X42 PIPES and we are regarded as India’s top API 5L X42 PIPE Suppliers and API 5L X42 PIPE Manufacturers.

APPLICATIONS OF API 5L X42 PIPES:

The whole range of API 5L X42 PIPES have various applications in different fields. X42 Pipe is a type of pipe that is used conveying oil and gas materials over long distances. API 5L X42 Pipe is just one of the many grades that are available within this specification. Some of the applications of API 5L X42 PIPES are:

            • Petrochemicals
            • Oil Refineries
            • Pressure Vessels
            • Power Generation
            • Boiler Equipment

CARBON STEEL PIPES TUBES INVENTORY AT A GLANCE

Here is a list of the inventory of Carbon Steel Pipes:
-> Seamless Pipes

                • ASTM A106 GR B Seamless Pipes
                • ASTM A333 GR 6 Seamless Pipes
                • ASTM A53 B Seamless Pipes
                • ISO 3183 L245/L290/L320/L360/L415/L450/L485/L555 Seamless Pipes
                • ISO 3183 L245/L290/L320/L360/L415/L450/L485/L555 Seamless Pipes
                • ST 52 Seamless Pipes
                • S355/S420/S460 Seamless Pipes

(In this you have variations like NACE MR0175, HIC, SSC, 3.2 Certification)

-> Welded Pipes

        • ASTM A106 GR B Welded Pipes
        • ASTM A333 GR 6 Welded Pipes
        • API 5L GR B PSL1 / PSL2 Welded Pipes; API 5L X42 PSL1/ PSL2 Welded Pipes; API 5L X46 PSL1/ PSL2 Welded Pipes; API 5L X52 PSL1 / PSL2 Welded Pipes; API 5L X56 PSL1 / PSL2 Welded Pipes; API 5L X60 PSL1 / PSL2 Welded Pipes; API 5L X65 PSL1/ PSL2 Welded Pipes; API 5L X70 PSL1 / PSL2 Welded Pipes; API 5L X80 PSL1 / PSL2 Welded Pipes; API 5L X100 PSL1 / PSL2 Welded Pipes; API 5L X120 PSL1/PSL2 Welded Pipes
        • API 5L GR B/X42/X46/X52/X56/X60/X65/X70/X80/X100/X120 PSL1/PSL2 LSAW Pipes
        • API 5L GR B/X42/X46/X52/X56/X60/X65/X70/X80/X100/X120 PSL1/PSL2 DSAW Pipes
        • ASTM A671/ASTM A672 CC60/CC65/CC70 CL12/CL22/CL32 EFW PIPES
        • ISO 3183 L245/L290/L320/L360/L415/L450/L485/L555 Welded Pipes
        • ISO 3183 L245/L290/L320/L360/L415/L450/L485/L555 LSAW Pipes
        • ST52 Welded Pipes
        • S355/S420/S460 Welded Pipes

Availability of API 5L X42 PSL1 pipes, API 5L X42 PSL2 PIPES, API 5L X42 SEAMLESS PIPES, API 5L X42 LSAW PIPES, API 5L X42 DSAW PIPES:

We at Trio Steel are the leading API 5L X42 Pipes Supplier and also the API 5L X42 Pipes Manufacturer. We supply and stock a full range of API 5L X42 PSL1 / PSL2 Pipes. All products we supply are conforming to industry standards or exceed national and international standards.

They are individually covered so that the premium quality of the material is retained and there are no damages in the last stages of its production.

These pipes come with imprints relevant to the job information (for example heat number, size, material, and part number). This information is also printed along all to whom pipes are delivered. Hence, we have all the various types of API 5L X42 Pipes available. This list includes

      1. API 5L X42 PSL1 PIPES
      2. API 5L X42 PSL2 PIPES
      3. API 5L X42 SEAMLESS PIPES
      4. API 5L X42 LSAW PIPES
      5. API 5L X42 DSAW PIPES
      6. API 5L X42 HIC TESTED PIPES
      7. API 5L X42 SSC TESTED PIPES
      8. API 5L X42 NACE MR0175 PIPES
      9. API 5L X42 3.2 CERTIFIED PIPES


API 5L X42 PIPES MANUFACTURERS AND EXPORTERS – TRIO STEEL

Our top-notch API 5L X42 Seamless Pipes, reasonable client administration and in-house API 5L X42 Pipes handling abilities have made us one of the arising and driving providers for API 5L X42 PSL1 / PSL2 Pipes. Our API 5L Seamless Pipes region unit traded much of the time to the north of Fifty-three nations. In the course of the most recent decade, we tend to have prepared over 2400+ a lot of Carbon Steel API 5L X42 Seamless Pipes for various nations.

 SOME OF THE COUNTRIES WE EXPORT TO

API 5L X42 PIPES in Brazil API 5L X42 PIPES in Germany API 5L X42 PIPES in Indonesia API 5L X42 PIPES in Singapore
API 5L X42 PIPES in Thailand  API 5L X42 PIPES in Malaysia API 5L X42 PIPES in Iran  API 5L X42 PIPES in Japan
API 5L X42 PIPES in Korea  API 5L X42 PIPES in Oman API 5L X42 PIPES in Qatar  API 5L X42 PIPES in Russia
API 5L X42 PIPES in Saudi Arabia API 5L X42 PIPES in Turkey API 5L X42 PIPES in Vietnam API 5L X42 PIPES in United Kingdom
API 5L X42 PIPES in United Arab Emirates API 5L X42 PIPES in Italy API 5L X42 PIPES in Argentina API 5L X42 PIPES in Colombia