Steel pipes like API 5L X46 PSL1 Pipe in Singapore are used for pipeline transportation systems in the petroleum and natural gas industries. For oil and gas transmission, structural application, and mechanical components API 5L X46 PSL1 Pipes are very suitable for these purposes.
TRIO STEEL IS A LEADING MANUFACTURER, SUPPLIER, AND EXPORTER OF API5L X46 PSL1 PIPE IN SINGAPORE.
The leading manufacturer, supplier, and exporter of API 5L X46 PSL1 Pipe in Singapore is Trio Steel.
Supplying and stocking full ranges of API5L X46 PSL1 line pipes. We supply all the products which conform to the standards of the industries like API, ASTM, ASME, ANSI, and other national and international standards.
In Singapore all API 5L X46 PSL1 Pipes are individually covered for ensuring the retention of premium quality of material, avoiding no damages in the last stages of production.
Imprints relevant to the job information are put on API 5L X46 PSL1 Pipes like heat number, size, material, part number, etc. To whomsoever, API5L X46 PSL1 Pipes is delivered this information is printed along and sent.
Your search for high tensile strength heavy wall line pipe requirements for deep sour wells, drilling, offshore drilling and production, arctic exploration, and production can all be found with Trio Steel. Be it API 5L X46 PSL1 Pipes of standard length, diameter, and tube endings, or any other type of carbon steel pipes, Trio Steel can meet all your requirements with our wide array of carbon steel pipes to suit any needs like natural gas, oil, or water transport, etc.
Modified to suit offshore structural purposes, API 5L X46 PSL1 Pipes in Singapore are high-yield seamless pipes. Intended for use in fixed offshore structures and is designed to operate in the offshore sector, but they aren’t just limited to that. Depending on the purpose of using it can be used in versatile ways.
The Best API 5L X46 PSL1 Pipes in Singapore are Supplied by Trio Steel, who are the leading Pipe Suppliers and Pipe Fitting Suppliers.
Grade: API 5L X46 PSL1 Pipe L 320
- X
- The x symbol followed by a two or three digit number equal to the specified minimum yields strength in 1000 psi rounded down to the nearest integer.
- Minimum Yield
- At pipe body 320 MPa (46,400 psi)
- Delivery Condition
- +N Normalizing rollingQ Quenched and tempered
where +Q refers to a heat treatment
process consisting of quench
hardening followed by tempering
- PSL
- PSL refers to product specification level,
where PSL 1 mentions the minimum mechancial requirement
Applicable codes and standards API 5L, 45th Edition / ISO 3183 Specification for line pipe – technical delivery conditions.
Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters
*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.
| CHEMICAL COMPOSITION | ||||||||||
| C | Si | MN | P | S | V | Nb | Ti | Other | Carbon Equivalent | |
| Max (b) | Max | Max (b) | Max | Max | Max | Max | Max | % maximum | ||
| CE(IIW) | CE(Pcm) | |||||||||
| 0.26 | – | 1.40 | 0.030 | 0.030 | (d) | (d) | (d) | (a) | – | – |
| MECHANICAL REQUIREMENT | ||||||||||
| Tensile Requirements on Pipe body of welded pipes | Ratio | Elongation | CVN Absorbed Energy | Heat Treatment | ||||||
| Yield Strength (R10.5) | Tensile Strength (R) | R 10.5/ R | % | 0 degree celsius | ||||||
| PSI | Mpa | PSI | Mpa | Max | Minimum | Min J | Min ft. lb | Wield Seam & HAZ Normalizing | ||
| 46,400 min | 320 min | 63,100 min | 435 min | – | – | – | ||||
|
IMPACT TEST |
|
| AVG ABSORBED ENERGY | IND. ABSORBED ENERGY |
| MIN (JOULES) | MIN (JOULES) |
| 27 | 20 |
Notes:
- 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum. For grades up to and including X52, Cu, Cr and Ni shall not be added intentionally.
- For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese in permissible, up to a maximum of 1.65% for grades ≥ B, but ≤ X52; up to a maximum of 1.75% for grades > X52, but
- Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
- The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
- Unless otherwise agreed.
- Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
- Unless otherwise agreed, 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum
- Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
- Unless otherwise agreed, 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum.
Other details
Surface
- All surfaces have been 100% visually inspected. The surface condition complies with API 5L standards.
- External surface of pipe shall be coated with a layer of varnish.
NDT
All pipes will be ultrasonic tested on pipe body and pipe end as per API 5L standards:
- longitudinal: 100% of the pipe surface
- pipe ends not scanned by automatic ultrasonic system shall be inspected by manual UT or Magnetic Particle Examination.
Certification and traceability
All dimensions will be supplied with a 3.2 certificate according to EN 10204, endorsed by recognized and independent inspection agency. Marking shall be in SI units (X46) accordance with API requirements & mill standard.
Dimensional control
All dimensions will be supplied according to API 5L clause 9.11; In addition, the following tolerances apply:
- Pipe body: +/- 0,75%
- Pipe end: +/- 0,5%
- Wall thickness: +15%, -12,5%
- Length: -0 / +100mm
Pipe Ends
Pipe Ends are bevelled. End angle shall be 30°- 0°/+5°, root face shall be 1.6mm +/- 0.8mm and fitted with bevel protectors.
Protection
Pipes are varnished on the outside.
Available stock at Trio Steel
Fill the below detail
API 5L other PRODUCTS
Related products
Carbon steel is more commonly used than any other metal, and has long been admired for its versatilityKnow more
The benefits of alloy steel pipe include its tensile strength, yield strength, fatigue resistance,Know more
Trio Steel Supply has an extensive selection of pipe fittings and flanges to fully complement ourKnow more
