API 5L X100 LSAW Pipe

When selecting API 5L X100 LSAW PIPE, it is important to consider factors such as project specifications, environmental conditions, and regulatory requirements. Trio Steel, a renowned supplier and manufacturer, specializes in offering a comprehensive range of API 5L X100 LSAW PIPE that adhere to industry standards, ensuring efficient and secure fluid transportation in diverse operational settings.

Corrosion Resistance: API 5L X100 LSAW PIPE are available with various corrosion-resistant coatings and linings. These coatings, such as fusion-bonded epoxy (FBE), polyethylene (PE), and polypropylene (PP), provide an additional layer of protection against corrosion, significantly extending the lifespan of the pipes in corrosive environments.

Pressure Rating: API 5L X100 LSAW PIPE are classified into different pressure ratings, including standard (STD), extra strong (XS), and double extra strong (XXS). These ratings indicate the maximum allowable operating pressure for the pipes, ensuring their suitability for specific applications.

Dimensions and Sizes: API 5L X100 LSAW PIPE are manufactured in a wide range of sizes and dimensions to accommodate varying project requirements. These include outer diameter (OD), wall thickness, and pipe lengths, which are crucial considerations for proper installation and compatibility with existing infrastructure.

Material Properties: API 5L X100 LSAW PIPE are predominantly made from carbon steel, known for its exceptional mechanical properties such as high tensile strength and impact resistance. The chemical composition of the steel used in these pipes is meticulously controlled to ensure the desired properties and adherence to specified standards.

By considering these technical aspects, API 5L X100 LSAW PIPE from Trio Steel provide reliable and durable solutions for fluid transportation in the oil, gas, and petrochemical industries, meeting the stringent requirements of various applications.

API 5L X100 LSAW Pipe is a steel pipe and is commonly used for pipeline transportation systems in the petroleum and natural gas industries. 
 API 5L is suitable for oil and gas transmission, structural application, and mechanical components.

Trio Steel is a leading stockist, supplier and exporter ofAPI 5L X100 LSAW Pipe.

All API 5L pipe are individually covered so that the premium quality of material is retained and there are no damages in the last stages of production.

API 5L comes with imprints relevant to the job information (for example heat number, size, material and part number). This information is also printed along all to whom API 5L is delivered.

Your need forAPI 5L X100 LSAW Pipe of standard length and diameter pipes and tubing ends here. If you need high strength, high tensile, heavy wall line pipe requirements for deep sour wells, drilling, offshore drilling and production, arctic exploration and production, or you need API 5L X100 LSAW Pipe for natural gas, oil or water transport, then Trio Steel can meet the demands of your company.

X100 Steel Pipe is a high yield seamless pipe that is modified to suit offshore structural purposes.
 It is intended for (but not limited to) use in fixed offshore structures and is designed to operate in the offshore sector.

Are you in need API 5L GR.B PSL 1 Pipe that meets your expectation?. We do have a large number of API 5L GR.B PSL 1 Pipe & A106 GR. B Carbon Steel Seamless Pipes  fulfill all your requirements in your project. We export our products all over the world

Popular Product Searches on Triosteel:
API 5L Pipes:PSL1 PipesPSL2 Pipes,Seamless Pipes,LSAW Pipes,DSAW Pipes.

API5L PSL1 Pipes: API5L X42 PSL1 Pipes, X46 PSL1 PipesX52 PSL1 PipesX56 PSL1 Pipes, X60 PSL1 PipesAPI5L X65 PSL1 Pipes, X70 PSL1 PipesX80 PSL1 LSAW Steel Pipes, X80 PSL1 Seamless Pipes.

API5L PSL2 PipesX42 PSL2 Pipes, X46 PSL2 Pipes, X52 PSL2 Pipes, X56 PSL2 PipesX60 PSL2 Pipes, X65 PSL2 PipesX70 PSL2 Pipes, X80 PSL2 LSAW Steel PipesX80 PSL2 Seamless Pipes, X100 PSL2 Pipes, X120 PSL2 Pipes.

API5L Seamless PipesGr.B PSL1 Seamless Pipe, Gr.B PSL2 Seamless Pipe, X42 PSL1 Seamless Pipes, X42 PSL2 Seamless Pipes, X46 PSL1 Seamless Pipes, X46 PSL2 Seamless Pipes, X52 PSL1 Seamless Pipes, X52 PSL2 Seamless PipesX56 PSL1 Seamless Pipes, X56 PSL2 Seamless Pipes, X60 PSL1 Seamless PipesX60 PSL2 Seamless Pipes, X65 PSL1 Seamless Pipes, X65 PSL2 Seamless Pipes, API5L X70 PSL1 Seamless Pipes, X70 PSL2 Seamless Pipes, X100 Seamless Pipes, X120 Seamless Pipe.

DSAW Line Pipes: X42 PSL1 DSAW Pipes, X42 PSL2 DSAW Pipes, X46 PSL1 DSAW Pipes, X46 PSL2 DSAW PipesX52 PSL1 DSAW PipesX52 PSL2 DSAW Pipes, X56 PSL1 DSAW Pipes, X56 PSL2 DSAW Pipes, X60 PSL1 DSAW Pipes, X60 PSL2 DSAW Pipes, X65 PSL1 DSAW Pipes, X65 PSL2 DSAW Pipes, X70 PSL1 DSAW Pipes, X70 PSL2 DSAW Pipes, X80 DSAW Steel Pipes, X80 Seamless Steel Pipes, X100 DSAW Pipes, X120 DSAW Pipe.

Trio Steel is also the leading Pipe Suppliers and Pipe Fitting Suppliers of X100 steel Pipe.

Grade: X100 Q LSAW

  • X
  • The x symbol followed by a two or three digit number equal to the specified minimum yields strength in 1000 psi rounded down to the nearest integer.
  • Minimum Yield
  • At pipe body 690 MPa (100000 psi)
  • Delivery Condition
  • +N Normalizing rollingQ Quenched and tempered
    where +Q refers to a heat treatment
    process consisting of quench
    hardening followed by tempering
  • PSL
  • PSL refers to product specification level,
    where PSL 1 mentions the minimum mechancial requirement

Applicable codes and standards
 API 5L, 45th Edition / ISO 3183 
Specification for line pipe – technical delivery conditions. 

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION
C Si MN P S V Nb Ti Other Carbon Equivalent
Max (b) Max Max (b) Max Max Max Max Max % maximum
CE(IIW) CE(Pcm)
0.12 (e) 0.45 (e) 1.70 (e) 0.025 0.015 (h) (h) (h) (i) 0.43 0.25
MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes Ratio Elongation CVN Absorbed Energy Heat Treatment
Yield Strength (R10.5) Tensile Strength (R) R 10.5/ R % 0 degree celsius
PSI Mpa PSI Mpa Max Minimum Min J Min ft. lb Wield Seam & HAZ Normalizing
100,500-121,800 690-840 110,200-143,550 760-990 0.93   27 20
               

IMPACT TEST

AVG ABSORBED ENERGY IND. ABSORBED ENERGY
MIN (JOULES) MIN (JOULES)
27 20

Notes:

  1. 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum. For grades up to and including X52, Cu, Cr and Ni shall not be added intentionally.
  2. For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese in permissible, up to a maximum of 1.65% for grades ≥ B, but ≤ X52; up to a maximum of 1.75% for grades > X52, but
  3. Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
  4. The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
  5. Unless otherwise agreed.
  6. Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15
  7. Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
  8. The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
  9. Unless otherwise agreed.
  10. Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%

Other details

Surface

  1. All surfaces have been 100% visually inspected. The surface condition complies with API 5L standards.
  2. External surface of pipe shall be coated with a layer of varnish.

NDT

All pipes will be ultrasonic tested on pipe body and pipe end as per API 5L standards:

  1. longitudinal: 100% of the pipe surface
  2. pipe ends not scanned by automatic ultrasonic system shall be inspected by manual UT or Magnetic Particle Examination.

Certification and traceability

All dimensions will be supplied with a 3.2 certificate according to EN 10204, endorsed by recognized and independent inspection agency. Marking shall be in SI units (X100) accordance with API requirements & mill standard.

Dimensional control

All dimensions will be supplied according to API 5L clause 9.11; In addition, the following tolerances apply:

  1. Pipe body: +/- 0,75%
  2. Pipe end: +/- 0,5%
  3. Wall thickness: +15%, -12,5%
  4. Length: -0 / +100mm

Pipe Ends

Pipe Ends are bevelled. End angle shall be 30°- 0°/+5°, root face shall be 1.6mm +/- 0.8mm and fitted with bevel protectors.

Protection

Pipes are varnished on the outside.

Read More About API Pipes

Available stock at Trio Steel

    Carbon Steel Pipes Tubes inventory at a glance

    List of Countries Where Trio Steel Supply

    Our main markets for selling are

    We also supply


    API 5L other PRODUCTS

    PSL2 PSL2
    API 5L Pipe
    API 5L Line Pipe
    API 5L Supplier
    API 5L Pipe Price
    Know more
    Seamless Seamless
    API 5L Pipe
    API 5L Line Pipe
    API 5L Supplier
    API 5L Pipe Price
    Know more
    LSAW LSAW
    API 5L Pipe
    API 5L Line Pipe
    API 5L Supplier
    API 5L Pipe Price
    Know more
    DSAW DSAW
    API 5L Pipe
    API 5L Line Pipe
    API 5L Supplier
    API 5L Pipe Price
    Know more

    Related products

    Carbon Pipes Carbon Steel Seamless Pipes Carbon steel is more commonly used than any other metal, and has long been admired for its versatility
    Know more
    Alloy Steel Pipes Alloy Steel Pipes The benefits of alloy steel pipe include its tensile strength, yield strength, fatigue resistance,
    Know more
    Stainless Steel Pipes Stainless Steel Pipes Trio Steel Supply has an extensive selection of pipe fittings and flanges to fully complement our
    Know more
    Fittings Fitting Trio Steel Supply has an extensive selection of pipe fittings and flanges to fully complement our Know more