API 5L LSAW Line Pipe

API 5L X60 PSL2 3.2 Certified Pipe is a steel pipe, commonly used in the petroleum and natural gas industries for pipeline transportation systems. API 5L is suitable for the transport of oil and gas, electrical uses, and mechanical components.

Trio Steel is a leading manufacturer, supplier and exporter of API 5L X60 PSL2 3.2 Certified Pipe

We supply and store a wide range of API 5L X60 PSL2 3.2 Certified Pipe. All products which we supply comply with industry standards or exceed API, ASTM, ASME, ANSI and other national and international standards.

API 5L X60 PSL2 3.2 Certified pipe is separately wrapped in such a manner that the high consistency of the material is preserved and no degradation happens in the final processing stages.

API 5L X60 PSL2 3.2 Certified Pipe comes with work information related prints (e.g., heat number, size, material and part number). This detail is also printed along with those to whom API 5L X60 PSL2 3.2 certified pipe is sent.

Your need for a API 5L X60 PSL2 3.2 certified pipe with standard length and diameter pipes and tubing ends here. When you need high steel, strong tensile, hard wall line pipe standards for deep sour wells, fracking, offshore fracking and development, arctic exploration and manufacturing, or you need API 5L X60 PSL2 3.2 Certified Pipe for natural gas , oil or water transport, then Trio Steel will fulfill the company’s demands.

API 5L X60 PSL2 3.2 Certified Pipe (enhanced) is a smooth, high yield pipe which is updated to suit robust offshore purposes. It is intended for (but not limited to) use in offshore fixed structures and is intended for operation in the offshore sector. Rexal Tubes is a leading stockiest in India with over 800-ton stock in carbon steel seamless pipe tubes.

Popular Product Searches on Triosteel:
API 5L Pipes:PSL1 Pipes, PSL2 Pipes,Seamless Pipes,LSAW Pipes,DSAW Pipes.

API5L PSL1 Pipes: API5L X42 PSL1 Pipes, X46 PSL1 Pipes, X52 PSL1 Pipes, X56 PSL1 Pipes, X60 PSL1 Pipes, API5L X65 PSL1 Pipes, X70 PSL1 Pipes, X80 PSL1 LSAW Steel Pipes, X80 PSL1 Seamless Pipes.

API5L PSL2 Pipes: X42 PSL2 Pipes, X46 PSL2 Pipes, X52 PSL2 Pipes, X56 PSL2 Pipes, X60 PSL2 Pipes, X65 PSL2 Pipes, X70 PSL2 Pipes, X80 PSL2 LSAW Steel Pipes, X80 PSL2 Seamless Pipes, X100 PSL2 Pipes, X120 PSL2 Pipes.

API5L Seamless Pipes: Gr.B PSL1 Seamless Pipe, Gr.B PSL2 Seamless Pipe, X42 PSL1 Seamless Pipes, X42 PSL2 Seamless Pipes, X46 PSL1 Seamless Pipes, X46 PSL2 Seamless Pipes, X52 PSL1 Seamless Pipes, X52 PSL2 Seamless Pipes, X56 PSL1 Seamless Pipes, X56 PSL2 Seamless Pipes, X60 PSL1 Seamless Pipes, X60 PSL2 Seamless Pipes, X65 PSL1 Seamless Pipes, X65 PSL2 Seamless Pipes, API5L X70 PSL1 Seamless Pipes, X70 PSL2 Seamless Pipes, X100 Seamless Pipes, X120 Seamless Pipe.

DSAW Line Pipes: X42 PSL1 DSAW Pipes, X42 PSL2 DSAW Pipes, X46 PSL1 DSAW Pipes, X46 PSL2 DSAW Pipes, X52 PSL1 DSAW Pipes, X52 PSL2 DSAW Pipes, X56 PSL1 DSAW Pipes, X56 PSL2 DSAW Pipes, X60 PSL1 DSAW Pipes, X60 PSL2 DSAW Pipes, X65 PSL1 DSAW Pipes, X65 PSL2 DSAW Pipes, X70 PSL1 DSAW Pipes, X70 PSL2 DSAW Pipes, X80 DSAW Steel Pipes, X80 Seamless Steel Pipes, X100 DSAW Pipes, X120 DSAW Pipe.

API 5L X60 PSL2 3.2 Certified Pipe Grade,Chemical Composition and Mechanical Requirements

  • X
  • The x symbol followed by a two or three digit number equal to the specified minimum yields strength in 1000 psi rounded down to the nearest integer.
  • Minimum Yield
  • At pipe body 415-565 520-760 MPa (60,200-81,900 75,400-110,200 psi)
  • Delivery Condition
  • +N Normalizing rollingQ Quenched and tempered
    where +Q refers to a heat treatment
    process consisting of quench
    hardening followed by tempering
  • PSL
  • PSL refers to product specification level,
    where PSL 1 mentions the minimum mechancial requirement

Applicable codes and standards
 API 5L, 45th Edition / ISO 3183 
Specification for line pipe – technical delivery conditions. 

Size: 16” to 64”
Wall Thickness: 6 MM to 65MM
Length: up to 18 Meters

Mention the following as *Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION
C Si MN P S V Nb Ti Other Carbon Equivalent
Max (b) Max Max (b) Max Max Max Max Max % maximum
CE(IIW) CE(Pcm)
0.26 1.20 0.030 0.030 (c),(d) (c),(d) (d) (a)
MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes Ratio Elongation CVN Absorbed Energy Heat Treatment
Yield Strength (R10.5) Tensile Strength (R) R 10.5/ R % 0 degree celsius
PSI Mpa PSI Mpa Max Minimum Min J Min ft. lb Wield Seam Normalizing
35,500 min 245 min 60,200 min 415 min  
               

IMPACT TEST

AVG ABSORBED ENERGY IND. ABSORBED ENERGY
MIN (JOULES) MIN (JOULES)
27 20

Notes:

  1. 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum. For grades up to and including X52, Cu, Cr and Ni shall not be added intentionally.
  2. For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese in permissible, up to a maximum of 1.65% for grades ≥ B, but ≤ X52; up to a maximum of 1.75% for grades > X52, but
  3. Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
  4. The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
  5. Unless otherwise agreed.
  6. Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15
  7. Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
  8. The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
  9. Unless otherwise agreed.
  10. Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%

Click here for API 5L Pipes in Singapore

Other details

Surface

    1. All surfaces were visually inspected at 100%. The condition of the surface complies with API 5L standards.
    1. The outer surface of the pipe shall be coated with a varnish layer.

NDT

Both pipelines must be ultrasonically tested as per API 5L specifications on the body of the pipelines and pipe ends:

    1. Longitudinal: 100 percent surface of the pipe
    1. Pipe ends that are not tested by an automated ultrasonic device shall be checked by manual UT or Magnetic Particle Test.

Certification and Traceability

A 3.2 certificate according to EN 10204, certificate by recognised and neutral inspection body, must be supplied to all specifications. In SI units (B) the marking shall be in accordance with the requirements of the API & mill standard.

Dimensional Control

All dimensions will be supplied according to API 5L clause 9.11; In addition, the following tolerances apply:

    1. Pipe body: +/- 0,75%
    1. Pipe end: +/- 0,5%
    1. Wall thickness: +15%, -12,5%
    1. Length: -0 / +100mm

Pipe Ends

Pipe Ends are beveled. End angle shall be 30°- 0°/+5°, root face shall be 1.6mm +/- 0.8mm and fitted with bevel protectors.

Protection

Pipes are varnished on the outside.

Available stock at Trio Steel

    Carbon Steel Pipes Tubes inventory at a glance

    List of Countries Where Trio Steel Supply

    Our main markets for selling are

    We also supply


    API 5L other PRODUCTS

    PSL1 PSL1
    API 5L Pipe
    API 5L Line Pipe
    API 5L Supplier
    API 5L Pipe Price
    Know more
    PSL2 PSL2
    API 5L Pipe
    API 5L Line Pipe
    API 5L Supplier
    API 5L Pipe Price
    Know more
    Seamless Seamless
    API 5L Pipe
    API 5L Line Pipe
    API 5L Supplier
    API 5L Pipe Price
    Know more
    DSAW DSAW
    API 5L Pipe
    API 5L Line Pipe
    API 5L Supplier
    API 5L Pipe Price
    Know more

    Related products

    Carbon Pipes Carbon Steel Seamless Pipes Carbon steel is more commonly used than any other metal, and has long been admired for its versatility
    Know more
    Alloy Steel Pipes Alloy Steel Pipes The benefits of alloy steel pipe include its tensile strength, yield strength, fatigue resistance,
    Know more
    Stainless Steel Pipes Stainless Steel Pipes Trio Steel Supply has an extensive selection of pipe fittings and flanges to fully complement our
    Know more
    Fittings Fitting Trio Steel Supply has an extensive selection of pipe fittings and flanges to fully complement our Know more