API 5L X46 PSL2 3.2 Certified Pipe is a steel pipe and is popular in the oil and natural gas pipeline systems. API 5L is ideal for the transmission of oil and gas, structural and mechanical parts.
Trio Steel is a leading manufacturer, supplier and exporter of API 5L X46 PSL2 3.2 Certified Pipe
We offer and store a full selection of API 5L X46 PSL2 3.2 Certified Pipe. All products we supply comply with or exceed API, ASTM, ASME, ANSI, and other national and international standards.
API 5L X46 PSL2 3.2 Certified Pipe is treated separately so that superior content quality is preserved and there will be no harm during the final production stages.
API 5L X46 PSL2 3.2 Certified Pipe is available with job information imprints (for example, the heat, size, material and part number). All API 5L X46 PSL1 3.2 Certified pipe supplies are also printed with this information.
Your criteria for the normal length, diameter tube, and tubing pipes API 5 L X46 PSL2 3.2 Certified Pipe ends here. For high power, heaviness, high tensile heavy wall pipe requirements for dew fresh wells, for boiling, offshore boiling, and production, for exploring and producing the Arctic, or for certified natural gas, petroleum or water pipes API 5L X46 PSL2 3.2 Certified Pipe, Trio Steel is capable of satisfying your business requirements.
API 5L X46 PSL2 3.2 Certified Pipe (enhanced) is a high-performance pipe which is adapted to structural offshore applications. This is planned for (but not limited to) use in offshore fixed structures and is intended for offshore use. Rexal Tubes is leading stockiest in India with over 800-ton stock in carbon steel seamless pipe tubes.
As said above, the API 5L X46 PSL2 3.2 Certified Pipe are higher quality pipes that have high resistance to pressure and temperature. The API 5L X46 PSL2 3.2 Certified Pipe are fit for strenuous conditions across industries that make use of pipes for transmission.
Popular Product Searches on Triosteel:
API 5L Pipes:PSL1 Pipes, PSL2 Pipes,Seamless Pipes,LSAW Pipes,DSAW Pipes.
API5L PSL1 Pipes: API5L X42 PSL1 Pipes, X46 PSL1 Pipes, X52 PSL1 Pipes, X56 PSL1 Pipes, X60 PSL1 Pipes, API5L X65 PSL1 Pipes, X70 PSL1 Pipes, X80 PSL1 LSAW Steel Pipes, X80 PSL1 Seamless Pipes.
API5L PSL2 Pipes: X42 PSL2 Pipes, X46 PSL2 Pipes, X52 PSL2 Pipes, X56 PSL2 Pipes, X60 PSL2 Pipes, X65 PSL2 Pipes, X70 PSL2 Pipes, X80 PSL2 LSAW Steel Pipes, X80 PSL2 Seamless Pipes, X100 PSL2 Pipes, X120 PSL2 Pipes.
API5L Seamless Pipes: Gr.B PSL1 Seamless Pipe, Gr.B PSL2 Seamless Pipe, X42 PSL1 Seamless Pipes, X42 PSL2 Seamless Pipes, X46 PSL1 Seamless Pipes, X46 PSL2 Seamless Pipes, X52 PSL1 Seamless Pipes, X52 PSL2 Seamless Pipes, X56 PSL1 Seamless Pipes, X56 PSL2 Seamless Pipes, X60 PSL1 Seamless Pipes, X60 PSL2 Seamless Pipes, X65 PSL1 Seamless Pipes, X65 PSL2 Seamless Pipes, API5L X70 PSL1 Seamless Pipes, X70 PSL2 Seamless Pipes, X100 Seamless Pipes, X120 Seamless Pipe.
DSAW Line Pipes: X42 PSL1 DSAW Pipes, X42 PSL2 DSAW Pipes, X46 PSL1 DSAW Pipes, X46 PSL2 DSAW Pipes, X52 PSL1 DSAW Pipes, X52 PSL2 DSAW Pipes, X56 PSL1 DSAW Pipes, X56 PSL2 DSAW Pipes, X60 PSL1 DSAW Pipes, X60 PSL2 DSAW Pipes, X65 PSL1 DSAW Pipes, X65 PSL2 DSAW Pipes, X70 PSL1 DSAW Pipes, X70 PSL2 DSAW Pipes, X80 DSAW Steel Pipes, X80 Seamless Steel Pipes, X100 DSAW Pipes, X120 DSAW Pipe.
API 5L X46 PSL2 3.2 Certified Pipe Grade,Chemical Composition and Mechanical Requirements
- X
- The x symbol followed by a two or three digit number equal to the specified minimum yields strength in 1000 psi rounded down to the nearest integer.
- Minimum Yield
- At pipe body 320-525 435-760 MPa (46,400-76,100 63,100-110,200 psi)
- Delivery Condition
- +N Normalizing rollingQ Quenched and tempered
where +Q refers to a heat treatment
process consisting of quench
hardening followed by tempering
- PSL
- PSL refers to product specification level,
where PSL 1 mentions the minimum mechancial requirement
Applicable codes and standards API 5L, 45th Edition / ISO 3183 Specification for line pipe – technical delivery conditions.
Size: 16” to 64”
Wall Thickness: 6 MM to 65MM
Length: up to 18 Meters
Mention the following as *Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.
CHEMICAL COMPOSITION | ||||||||||
C | Si | MN | P | S | V | Nb | Ti | Other | Carbon Equivalent | |
Max (b) | Max | Max (b) | Max | Max | Max | Max | Max | % maximum | ||
CE(IIW) | CE(Pcm) | |||||||||
0.26 | – | 1.20 | 0.030 | 0.030 | (c),(d) | (c),(d) | (d) | (a) | – | – |
MECHANICAL REQUIREMENT | ||||||||
Tensile Requirements on Pipe body of welded pipes | Ratio | Elongation | CVN Absorbed Energy | Heat Treatment | ||||
Yield Strength (R10.5) | Tensile Strength (R) | R 10.5/ R | % | 0 degree celsius | ||||
PSI | Mpa | PSI | Mpa | Max | Minimum | Min J | Min ft. lb | Wield Seam Normalizing |
35,500 min | 245 min | 60,200 min | 415 min | – | – | – | ||
IMPACT TEST |
|
AVG ABSORBED ENERGY | IND. ABSORBED ENERGY |
MIN (JOULES) | MIN (JOULES) |
27 | 20 |
Notes:
- 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum. For grades up to and including X52, Cu, Cr and Ni shall not be added intentionally.
- For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese in permissible, up to a maximum of 1.65% for grades ≥ B, but ≤ X52; up to a maximum of 1.75% for grades > X52, but
- Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
- The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
- Unless otherwise agreed.
- Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15
- Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
- The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
- Unless otherwise agreed.
- Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
Other details
Surface
-
- The visual examination of all surfaces was 100%. The state of the surface conforms to the specifications API 5L.
-
- The external pipe surface is covered by a varnish layer.
NDT
All pipes are ultrasound tested on the body and end of the pipe according to the API 5L standards:
-
- 100% of the surface of the pipe:
-
- A manual UT or Magnetic Particle Inspection shall examine the pipe ends which are not checked by an automated ultrasonic device.
Certification and Traceability
All measurements shall be accredited by the identifiable and impartial inspection body in compliance with EN 10204 3.2 certificates. In accordance with the API specifications and mill norms, the marking shall be in the SI units (B).
Dimensional Control
All dimensions will be supplied according to API 5L clause 9.11; In addition, the following tolerances apply:
-
- Pipe body: +/- 0,75%
-
- Pipe end: +/- 0,5%
-
- Wall thickness: +15%, -12,5%
-
- Length: -0 / +100mm
Pipe Ends
Pipe Ends are beveled. The end angle shall be 30°- 0°/+5°, root face shall be 1.6mm +/- 0.8mm and fitted with bevel protectors.
Protection
Pipes are varnished on the outside.