API 5L X65 PSL2 LSAW Pipe

API 5L X65 PSL 2 LSAW Pipe are steel pipes used commonly for pipeline industries to send out petroleum and natural gas to various industries. API 5L is mostly used for oil and gas transmission, structural application, and mechanical components. 

Trio Steel is a leading supplier of High Strength and High Tensile API 5L X65 PSL2 LSAW Pipes. These pipes have high yield and tensile strength and High tensile steel possesses exceptional strength, allowing it to withstand heavy loads and pressures. It is vital to understand the importance of the properties of these API 5L X65 PSL2 LSAW Pipes before you buy them. Apart from the standard API 5L X65 PSL2 LSAW Pipes which are impact tested at 0 Deg C, we can also provide these pipes with impacted tested at -20 Deg C and – 50 Deg C as per the project Use.

The minimum ultimate tensile strength of API 5L X65 LSAW  pipes is 77,600 PSI or 535 MPa
The minimum yield strength of API 5L X56 LSAW Pipes is 65,300 PSI or 450 MPa

Trio Steel is a leading manufacturer, supplier, and exporter of API 5L X65 PSL 2 LSAW Pipe

We arrange and export a complete range of API 5L X65 PSL 2 LSAW Pipe and these pipes are developed according to industry standards or exceed API, ASTM, ASME, ANSI, and other national and international criteria.

API 5L X65 PSL 2 LSAW Pipe is individually coated so that the excellent quality of the pipe is maintained and there are no defects in the last stages of production.

API 5L X65 PSL 2 LSAW Pipe will be provided with job descriptions such as heat number, size, material, and part number embedded on the pipe. Here the information of the sender is also printed on the pies.

The customer’s requirement for API 5L X65 PSL 2 LSAW Pipe of required length and diameter pipes and tubing ends here. If you require high strength, high tensile, heavy wall line pipe requirements for deep sour wells, drilling, offshore drilling and production, arctic exploration and production, or you need API 5L X65 PSL 2 LSAW Pipe for natural gas, oil, or water transport, then Trio Steel is the company that will provide an even exceeds your lead.

As an API 5L, X65 PSL2 LSAW Pipes Supplier and we curate pipes that are free of the dangers of cracking due to sulphide stress corrosion. We provide API 5L X65 PSL2 LSAW PIPES with good flow patterns and robustness. The pipes we design as an API 5L X65 PSL2 LSAW Pipes Supplier are crafted to fit the bill in the most critical conditions; they have minimum yield strength of 65,000 psi and thus are made use in the petroleum transportation industry, sand oil or natural gas industries as well. We monitor market trends and demands to develop new, sustainable, and cost-effective products that can be customised.

API 5L X65 PSL 2 LSAW Pipe that is enhanced are high yield seamless pipes that are custom made to match offshore structural purposes. Its main purpose is for (but not limited to) its use in fixed offshore structures and is created to function in the offshore sector. To get more details download API 5L X65 PSL 2 LSAW Pipe

Popular Product Searches on Triosteel:
API 5L Pipes:PSL1 PipesPSL2 Pipes,Seamless Pipes,LSAW Pipes,DSAW Pipes.

API5L PSL1 Pipes: API5L X42 PSL1 Pipes, X46 PSL1 PipesX52 PSL1 PipesX56 PSL1 Pipes, X60 PSL1 PipesAPI5L X65 PSL1 Pipes, X70 PSL1 PipesX80 PSL1 LSAW Steel Pipes, X80 PSL1 Seamless Pipes.

API5L PSL2 PipesX42 PSL2 Pipes, X46 PSL2 Pipes, X52 PSL2 Pipes, X56 PSL2 PipesX60 PSL2 Pipes, X65 PSL2 PipesX70 PSL2 Pipes, X80 PSL2 LSAW Steel PipesX80 PSL2 Seamless Pipes, X100 PSL2 Pipes, X120 PSL2 Pipes.

API5L Seamless PipesGr.B PSL1 Seamless Pipe, Gr.B PSL2 Seamless Pipe, X42 PSL1 Seamless Pipes, X42 PSL2 Seamless Pipes, X46 PSL1 Seamless Pipes, X46 PSL2 Seamless Pipes, X52 PSL1 Seamless Pipes, X52 PSL2 Seamless PipesX56 PSL1 Seamless Pipes, X56 PSL2 Seamless Pipes, X60 PSL1 Seamless PipesX60 PSL2 Seamless Pipes, X65 PSL1 Seamless Pipes, X65 PSL2 Seamless Pipes, API5L X70 PSL1 Seamless Pipes, X70 PSL2 Seamless Pipes, X100 Seamless Pipes, X120 Seamless Pipe.

DSAW Line Pipes: X42 PSL1 DSAW Pipes, X42 PSL2 DSAW Pipes, X46 PSL1 DSAW Pipes, X46 PSL2 DSAW PipesX52 PSL1 DSAW PipesX52 PSL2 DSAW Pipes, X56 PSL1 DSAW Pipes, X56 PSL2 DSAW Pipes, X60 PSL1 DSAW Pipes, X60 PSL2 DSAW Pipes, X65 PSL1 DSAW Pipes, X65 PSL2 DSAW Pipes, X70 PSL1 DSAW Pipes, X70 PSL2 DSAW Pipes, X80 DSAW Steel Pipes, X80 Seamless Steel Pipes, X100 DSAW Pipes, X120 DSAW Pipe.

API 5L X65 PSL 2 LSAW Pipe  Grade, Chemical Composition and Mechanical Requirements

Grade: API 5L X65 PSL 2 LSAW Pipe L450

  • X
  • The x symbol followed by a two or three digit number equal to the specified minimum yields strength in 1000 psi rounded down to the nearest integer.
  • Minimum Yield
  • At pipe body 450-600 MPa (65,300-87,000 psi)
  • Delivery Condition
  • +N Normalizing rollingQ Quenched and tempered
    where +Q refers to a heat treatment
    process consisting of quench
    hardening followed by tempering
  • PSL
  • PSL refers to product specification level,
    where PSL 2 provides a more
    extensive chemical composition
    complete with a mandatory minimum
    fracture toughness.

Applicable codes and standards
 API 5L, 45th Edition / ISO 3183 
Specification for line pipe – technical delivery conditions. 

Size: 16” to 64”
Wall Thickness: 6 MM TO 65 MM
Length: up to 18 Meters

 *Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION
C Si MN P S V Nb Ti Other Carbon Equivalent
Max (b) Max Max (b) Max Max Max Max Max % maximum
CE(IIW) CE(Pcm)
0.12 (e) 0.45 (e) 1.60 (e) 0.025 0.015 (h) (h) (h) (i) 0.43 0.25
MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes Ratio Elongation CVN Absorbed Energy Heat Treatment
Yield Strength (R10.5) Tensile Strength (R) R 10.5/ R % 0 degree celsius
PSI Mpa PSI Mpa Max Minimum Min J Min ft. lb Wield Seam & HAZ Normalizing
65,300-87,000 450-600 77,600-110,200 535-760 0.93 27 20

IMPACT TEST

AVG ABSORBED ENERGY IND. ABSORBED ENERGY
MIN (JOULES) MIN (JOULES)
27 20

Notes:

  1. 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum. For grades up to and including X52, Cu, Cr and Ni shall not be added intentionally.
  2. For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese in permissible, up to a maximum of 1.65% for grades ≥ B, but ≤ X52; up to a maximum of 1.75% for grades > X52, but
  3. Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
  4. The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
  5. Unless otherwise agreed.
  6. Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15
  7. Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
  8. The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
  9. Unless otherwise agreed.
  10. Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%

Click here for API 5L Pipes in Singapore

Other Details

Surface

    1. All textures have been 100% visually inspected. The surface circumstance complies with API 5L norms.
  1.       2. The exterior surface of the pipe shall be coated with a layer of varnish.

NDT

All pipes will be ultrasonic experiments done on pipe body and pipe end as per API 5L standards:

    1.  Longitudinal: 100% of the pipe surface
    2.  Pipe ends shall be inspected by manual UT or Magnetic Particle Examination.

Certification and Traceability

All dimensions will be provided with a 3.2 certificate according to EN 10204, approved by a recognized and independent inspection agency. Marking shall be in SI units (x46) by API codes & mill standards.

Dimensional Control

All extents will be provided according to API 5L clause 9.11; In addition, the following tolerances apply:

    1. Pipe body: +/- 0,75%
    1. Pipe end: +/- 0,5%
    1. Wall thickness: +15%, -12,5%
    1. Length: -0 / +100mm

Pipe Ends

Pipe Ends are beveled. The end angle shall be 30°- 0°/+5°, root face shall be 1.6mm +/- 0.8mm and fitted with bevel protectors.

Protection

Pipes are varnished on the exterior

Available Stock at Trio Steel

    Carbon Steel Pipes Tubes inventory at a glance

    List of Countries Where Trio Steel Supply

    Our main markets for selling are

    We also supply


    API 5L other PRODUCTS

    PSL1 PSL1
    API 5L Pipe
    API 5L Line Pipe
    API 5L Supplier
    API 5L Pipe Price
    Know more
    PSL2 PSL2
    API 5L Pipe
    API 5L Line Pipe
    API 5L Supplier
    API 5L Pipe Price
    Know more
    Seamless Seamless
    API 5L Pipe
    API 5L Line Pipe
    API 5L Supplier
    API 5L Pipe Price
    Know more
    DSAW DSAW
    API 5L Pipe
    API 5L Line Pipe
    API 5L Supplier
    API 5L Pipe Price
    Know more

    Related products

    Carbon Pipes Carbon Steel Seamless Pipes Carbon steel is more commonly used than any other metal, and has long been admired for its versatility
    Know more
    Alloy Steel Pipes Alloy Steel Pipes The benefits of alloy steel pipe include its tensile strength, yield strength, fatigue resistance,
    Know more
    Stainless Steel Pipes Stainless Steel Pipes Trio Steel Supply has an extensive selection of pipe fittings and flanges to fully complement our
    Know more
    Fittings Fitting Trio Steel Supply has an extensive selection of pipe fittings and flanges to fully complement our Know more