API 5L X42, X46, X52, X56, X60, X65, X70, X80 PSL2 Pipe Variants in Indonesia

API 5L PSL2 Pipes in Indonesia is a steel pipe and is commonly used for pipeline transportation systems in the petroleum and natural gas industries. API 5L is suitable for oil and gas transmission, structural application, and mechanical components.

TRIO STEEL IS A LEADING STOCKIST, SUPPLIER AND EXPORTER OF API 5L PSL2 PIPE IN INDONESIA.

All API 5L X42, X46, X52, X56, X60, X65, X70, X80 PSL2 Pipe Variants in Indonesia are individually covered so that the premium quality of material is retained and there are no damages in the last stages of production.

API 5L comes with imprints relevant to the job information (for example heat number, size, material and part number). This information is also printed along all to whom API 5L is delivered.

Your need for API 5L PSL2 pipes of standard length and diameter pipes and tubing ends here. If you need high strength, high tensile, heavy wall line pipe requirements for deep sour wells, drilling, offshore drilling and production, arctic exploration and production, or you need API 5L PSL2 pipe for natural gas, oil or water transport, then Trio Steel can meet the demands of your company.

PSL2 Steel Pipe is a high yield seamless pipe that is modified to suit offshore structural purposes. It is intended for (but not limited to) use in fixed offshore structures and is designed to operate in the offshore sector.

Trio Steel is also the leading Pipe Suppliers and Pipe Fitting Suppliers of API 5L X42, X46, X52, X56, X60, X65, X70, X80 PSL2 Pipe Variants in Indonesia.

API 5L GR.B PSL2
API 5L Gr.B PSL2
API 5L Pipe
API 5L Line Pipe
API 5L Supplier
API 5L Pipe Price

Know more

Applicable codes and standards
 API 5L, 45th Edition / ISO 3183 
Specification for line pipe – technical delivery conditions. 

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION
C Si MN P S V Nb Ti Other Carbon Equivalent
Max (b) Max Max (b) Max Max Max Max Max % maximum
CE(IIW) CE(Pcm)
0.22 0.45 1.20 0.025 0.015 0.05 0.05 0.04 (g) 0.43 0.25
MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes Ratio Elongation CVN Absorbed Energy Heat Treatment
Yield Strength (R10.5) Tensile Strength (R) R 10.5/ R % 0 degree celsius
PSI Mpa PSI Mpa Max Minimum Min J Min ft. lb Wield Seam Normalizing
35,500-65,300 245-450 60,200-110,200 415-760 0.93   - -
               

IMPACT TEST

AVG ABSORBED ENERGY IND. ABSORBED ENERGY
MIN (JOULES) MIN (JOULES)
27 20
API 5L X42 PSL 2
API 5L X42 PSL2
API 5L Pipe
API 5L Line Pipe
API 5L Supplier
API 5L Pipe Price

Know more

Applicable codes and standards
 API 5L, 45th Edition / ISO 3183 
Specification for line pipe – technical delivery conditions. 

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION

CHEMICAL COMPOSITION
C Si MN P S V Nb Ti Other Carbon Equivalent
Max (b) Max Max (b) Max Max Max Max Max % maximum
CE(IIW) CE(Pcm)
0.22 0.45 1.30/ 0.025 0.015 0.05 0.05 0.04 (g) 0.43 0.25
MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes Ratio Elongation CVN Absorbed Energy Heat Treatment
Yield Strength (R10.5) Tensile Strength (R) R 10.5/ R % 0 degree celsius
PSI Mpa PSI Mpa Max Minimum Min J Min ft. lb Wield Seam & HAZ Normalizing
42,100-71,800 290-495 60,200-110,200 415-760 0.93 - -

IMPACT TEST

AVG ABSORBED ENERGY IND. ABSORBED ENERGY
MIN (JOULES) MIN (JOULES)
27 20
API 5L X46 PSL2
API 5L X46 PSL2
API 5L Pipe
API 5L Line Pipe
API 5L Supplier
API 5L Pipe Price

Know more

Applicable codes and standards
 API 5L, 45th Edition / ISO 3183 
Specification for line pipe – technical delivery conditions. 

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION
C Si MN P S V Nb Ti Other Carbon Equivalent
Max (b) Max Max (b) Max Max Max Max Max % maximum
CE(IIW) CE(Pcm)
0.22 0.45 1.30/ 0.025 0.015 0.05 0.05 0.04 (g) 0.43 0.25
MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes Ratio Elongation CVN Absorbed Energy Heat Treatment
Yield Strength (R10.5) Tensile Strength (R) R 10.5/ R % 0 degree celsius
PSI Mpa PSI Mpa Max Minimum Min J Min ft. lb Wield Seam & HAZ Normalizing
46,400-76,100 320-525 63,100-110,200 435-760 0.93 - -

IMPACT TEST

AVG ABSORBED ENERGY IND. ABSORBED ENERGY
MIN (JOULES) MIN (JOULES)
27 20
API 5L X52 PSL2
API 5L X52 PSL2
API 5L Pipe
API 5L Line Pipe
API 5L Supplier
API 5L Pipe Price

Know more

Applicable codes and standards
 API 5L, 45th Edition / ISO 3183 
Specification for line pipe – technical delivery conditions. 

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION
C Si MN P S V Nb Ti Other Carbon Equivalent
Max (b) Max Max (b) Max Max Max Max Max % maximum
CE(IIW) CE(Pcm)
0.22 0.45 1.40/ 0.025 0.015 (d) (d) (d) (g) 0.43 0.25
MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes Ratio Elongation CVN Absorbed Energy Heat Treatment
Yield Strength (R10.5) Tensile Strength (R) R 10.5/ R % 0 degree celsius
PSI Mpa PSI Mpa Max Minimum Min J Min ft. lb Wield Seam & HAZ Normalizing
52,200-76,900 360-530 66,700-110,200 460-760 0.93 - -

IMPACT TEST

AVG ABSORBED ENERGY IND. ABSORBED ENERGY
MIN (JOULES) MIN (JOULES)
27 20
API 5L X56 PSL2
API 5L X56 PSL2
API 5L Pipe
API 5L Line Pipe
API 5L Supplier
API 5L Pipe Price

Know more

Applicable codes and standards
 API 5L, 45th Edition / ISO 3183 
Specification for line pipe – technical delivery conditions. 

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION
C Si MN P S V Nb Ti Other Carbon Equivalent
Max (b) Max Max (b) Max Max Max Max Max % maximum
CE(IIW) CE(Pcm)
0.22 0.45 1.40 0.025 0.015 (d) (d) (d) (g) 0.43 0.25
MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes Ratio Elongation CVN Absorbed Energy Heat Treatment
Yield Strength (R10.5) Tensile Strength (R) R 10.5/ R % 0 degree celsius
PSI Mpa PSI Mpa Max Minimum Min J Min ft. lb Wield Seam & HAZ Normalizing
56,600-79,000 390-545 71,100-110,200 490-760 0.93 - -

IMPACT TEST

AVG ABSORBED ENERGY IND. ABSORBED ENERGY
MIN (JOULES) MIN (JOULES)
27 20
API 5L X60 PSL2
API 5L X60 PSL2
API 5L Pipe
API 5L Line Pipe
API 5L Supplier
API 5L Pipe Price

Know more

Applicable codes and standards
 API 5L, 45th Edition / ISO 3183 
Specification for line pipe – technical delivery conditions. 

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Metersa

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all the products.

CHEMICAL COMPOSITION
C Si MN P S V Nb Ti Other Carbon Equivalent
Max (b) Max Max (b) Max Max Max Max Max % maximum
CE(IIW) CE(Pcm)
0.12 (e) 0.45 (e) 1.60 (e) 0.025 0.015 (h) (h) (h) (i) 0.43 0.25
MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes Ratio Elongation CVN Absorbed Energy Heat Treatment
Yield Strength (R10.5) Tensile Strength (R) R 10.5/ R % 0 degree celsius
PSI Mpa PSI Mpa Max Minimum Min J Min ft. lb Wield Seam & HAZ Normalizing
60,200-81,900 415-565 75,400-110,200 520-760 0.93 27 20

IMPACT TEST

AVG ABSORBED ENERGY IND. ABSORBED ENERGY
MIN (JOULES) MIN (JOULES)
27 20
API 5L X65 PSL2
API 5L X65 PSL2
API 5L Pipe
API 5L Line Pipe
API 5L Supplier
API 5L Pipe Price

Know more

Applicable codes and standards
 API 5L, 45th Edition / ISO 3183 
Specification for line pipe – technical delivery conditions. 

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION
C Si MN P S V Nb Ti Other Carbon Equivalent
Max (b) Max Max (b) Max Max Max Max Max % maximum
CE(IIW) CE(Pcm)
0.12 (e) 0.45 (e) 1.60 (e) 0.025 0.015 (h) (h) (h) (i) 0.43 0.25
MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes Ratio Elongation CVN Absorbed Energy Heat Treatment
Yield Strength (R10.5) Tensile Strength (R) R 10.5/ R % 0 degree celsius
PSI Mpa PSI Mpa Max Minimum Min J Min ft. lb Wield Seam & HAZ Normalizing
65,300-87,000 450-600 77,600-110,200 535-760 0.93 27 20

IMPACT TEST

AVG ABSORBED ENERGY IND. ABSORBED ENERGY
MIN (JOULES) MIN (JOULES)
27 20
API 5L X70 PSL2
API 5L X70 PSL2
API 5L Pipe
API 5L Line Pipe
API 5L Supplier
API 5L Pipe Price

Know more

Applicable codes and standards
 API 5L, 45th Edition / ISO 3183 
Specification for line pipe – technical delivery conditions. 

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION
C Si MN P S V Nb Ti Other Carbon Equivalent
Max (b) Max Max (b) Max Max Max Max Max % maximum
CE(IIW) CE(Pcm)
0.12 (e) 0.45 (e) 1.70 (e) 0.025 0.015 (h) (h) (h) (i) 0.43 0.25
MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes Ratio Elongation CVN Absorbed Energy Heat Treatment
Yield Strength (R10.5) Tensile Strength (R) R 10.5/ R % 0 degree celsius
PSI Mpa PSI Mpa Max Minimum Min J Min ft. lb Wield Seam & HAZ Normalizing
70,300-92,100 485-635 82,700-110,200 570-760 0.93 27 20

IMPACT TEST

AVG ABSORBED ENERGY IND. ABSORBED ENERGY
MIN (JOULES) MIN (JOULES)
27 20
API 5L X80 PSL2 LSAW Steel Pipes
API 5L X80 PSL2 LSAW Steel Pipes
API 5L Pipe
API 5L Line Pipe
API 5L Supplier
API 5L Pipe Price

Know more

Nominal Pipe Size for

API 5L X80 PSL2 LSAW Steel Pipes: 2″ to 28″ O.D.
Wall Thickness – Schedule 10 through 160, STD, XS, XXS

Chemical Properties  of API 5L X80 PSL2 LSAW Steel Pipes

Mass fraction, based upon heat and product analysis a
C Si Mn P S V Nb Ti Other
max.b max max.b max. max. max. max. max.
LSAW PIPE – API 5L X80  PSL2
0.22 0.45 1.30 0.025 0.015 0.05 0.05 0.04 g

Notes:

  1. 0.50% maximum for cooper; 0.50% maximum for nickel; 0.50% maximum for chroium and 0.15% maximum for molybdenum. For grades up to and including XS2, Cu, Cr and Ni shall not be added intentionally.
  2. For esach reduction of 0.01% below the specified maximum concentration of carbon, an increase of 0.05% above the specified maximum concentration for manganese is permissible, up to a maximum of 1.65% for grades>= X52; upto a maximum of 1.75% for grades>X52, but
  3. Unlcess otherwise agreed, the sum of the niobium and vanadium contents shall be <=0.06%.
  4. The sum of the niboium, vanadium and titanium concentrations shall be <=0.15%.
  5. Unless otherwise agreed.
  6. Unless otherwise agrees, the sum of niboium, vanadium and titanium concentrations shall be <=0.15%.
  7. Unless otherwie agreed, 0.50% maximum ofr copper, 0.30% maximum for nickel, 0.30% maximum for chromiumand 0.15% maximum for molybdenum.
  8. Unless otherwise agreed, the sum of niboium, vanadium and titanium concentrations shall be <=0.15%.
  9. For pipe with diameter<219.10mm(8.625″), the maximum yield strength shall be <=495Mps(71,800 psi).
MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes Ratio Elongation CVN Absorbed Energy Heat Treatment
Yield Strength (R10.5) Tensile Strength (R) R 10.5/ R % 0 degree celsius
PSI Mpa PSI Mpa Max Minimum Min J Min ft. lb Wield Seam & HAZ Normalizing
70,300-92,100 485-635 95000-125000 655-862 0.93 27 20

IMPACT TEST

AVG ABSORBED ENERGY IND. ABSORBED ENERGY
MIN (JOULES) MIN (JOULES)
27 20

Note:

  1. 0.50% maximum for copper, 0.50% maximum for nickel, 0.50% maximum for chromium, and 0.15% maximum for molybdenum.
  2. For each reduction of 0.01% below the specified maximum concetration for carbon, an increase of 0.05% above the specified maximum concentration for manganese is permissible, up to a maximum of 1.65%
  3. Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤0.06%.
  4. The sum of the niobium ,vanadium and titanium concentratons shall be ≤0.06%.
  5. Unless otheriwse agreed.
  6. Unless otherwise agreed, the sum of niobium, vanadium and titanium concentrations shall be ≤ 0.15%
API 5L X80 PSL2 Seamless Steel
API 5L X80 PSL2 LSAW Steel Pipes
API 5L Pipe
API 5L Line Pipe
API 5L Supplier
API 5L Pipe Price

Know more

Nominal Pipe Size for

API 5L X80 PSL 2 Seamless Steel Pipes India Special Steels : 2″ to 28″ O.D.
Wall Thickness – Schedule 10 through 160, STD, XS, XXS

Chemical Properties  of API 5L X80 PSL2 Seamless Steel Pipes

Mass fraction, based upon heat and product analysis a
C Si Mn P S V Nb Ti Other
max.b max max.b max. max. max. max. max.
SEAMLESS PIPE – API 5L X80 PSL2
0.22 0.45 1.30 0.025 0.015 0.05 0.05 0.04 g

Notes:

  1. 0.50% maximum for cooper; 0.50% maximum for nickel; 0.50% maximum for chroium and 0.15% maximum for molybdenum. For grades up to and including XS2, Cu, Cr and Ni shall not be added intentionally.
  2. For esach reduction of 0.01% below the specified maximum concentration of carbon, an increase of 0.05% above the specified maximum concentration for manganese is permissible, up to a maximum of 1.65% for grades>= X52; upto a maximum of 1.75% for grades>X52, but
  3. Unlcess otherwise agreed, the sum of the niobium and vanadium contents shall be <=0.06%.
  4. The sum of the niboium, vanadium and titanium concentrations shall be <=0.15%.
  5. Unless otherwise agreed.
  6. Unless otherwise agrees, the sum of niboium, vanadium and titanium concentrations shall be <=0.15%.
  7. Unless otherwie agreed, 0.50% maximum ofr copper, 0.30% maximum for nickel, 0.30% maximum for chromiumand 0.15% maximum for molybdenum.
  8. Unless otherwise agreed, the sum of niboium, vanadium and titanium concentrations shall be <=0.15%.
  9. For pipe with diameter<219.10mm(8.625″), the maximum yield strength shall be <=495Mps(71,800 psi).
MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes Ratio Elongation CVN Absorbed Energy Heat Treatment
Yield Strength (R10.5) Tensile Strength (R) R 10.5/ R % 0 degree celsius
PSI Mpa PSI Mpa Max Minimum Min J Min ft. lb Wield Seam & HAZ Normalizing
70,300-92,100 485-635 95000-125000 655-862 0.93 27 20

Note:

  1. 0.50% maximum for copper, 0.50% maximum for nickel, 0.50% maximum for chromium, and 0.15% maximum for molybdenum.
  2. For each reduction of 0.01% below the specified maximum concetration for carbon, an increase of 0.05% above the specified maximum concentration for manganese is permissible, up to a maximum of 1.65%
  3. Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤0.06%.
  4. The sum of the niobium ,vanadium and titanium concentratons shall be ≤0.06%.
  5. Unless otheriwse agreed.
  6. Unless otherwise agreed, the sum of niobium, vanadium and titanium concentrations shall be ≤ 0.15%
API 5L X100 PSL2 Pipe
API 5L X100 PSL2
API 5L Pipe
API 5L Line Pipe
API 5L Supplier
API 5L Pipe Price

Know more

Applicable codes and standards
 API 5L, 45th Edition / ISO 3183 
Specification for line pipe – technical delivery conditions. 

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION
C Si MN P S V Nb Ti Other Carbon Equivalent
Max (b) Max Max (b) Max Max Max Max Max % maximum
CE(IIW) CE(Pcm)
0.12 (e) 0.45 (e) 1.70 (e) 0.025 0.015 (h) (h) (h) (i) 0.43 0.25
MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes Ratio Elongation CVN Absorbed Energy Heat Treatment
Yield Strength (R10.5) Tensile Strength (R) R 10.5/ R % 0 degree celsius
PSI Mpa PSI Mpa Max Minimum Min J Min ft. lb Wield Seam & HAZ Normalizing
100,500-121,800 690-840 110,200-143,550 760-990 0.93   27 20
               

IMPACT TEST

AVG ABSORBED ENERGY IND. ABSORBED ENERGY
MIN (JOULES) MIN (JOULES)
27 20
API 5L X120 PSL2 Pipe
API 5L X100 PSL2
API 5L Pipe
API 5L Line Pipe
API 5L Supplier
API 5L Pipe Price

Know more

Applicable codes and standards
 API 5L, 45th Edition / ISO 3183 
Specification for line pipe – technical delivery conditions. 

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all the products.

CHEMICAL COMPOSITION
Grade C Mn P S Si Nb+Ti Ni+Cr+Cu Cr+Mn+Mo
X120 0.06 1.9 0.004 0.004 0.25 ≤0.08 ≤1.5 ≤3
MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes Ratio Elongation CVN Absorbed Energy Heat Treatment
Yield Strength (R10.5) Tensile Strength (R) R 10.5/ R % 0 degree celsius
PSI Mpa PSI Mpa Max Minimum Min J Min ft. lb Wield Seam & HAZ Normalizing
120,350-152,350 830-1050 132,675-166,025 915-1145 0.93   27 20
               

IMPACT TEST

AVG ABSORBED ENERGY IND. ABSORBED ENERGY
MIN (JOULES) MIN (JOULES)
27 20

Related products

Carbon Pipes Carbon Steel Seamless Pipes Carbon steel is more commonly used than any other metal, and has long been admired for its versatility
Know more
Alloy Steel Pipes Alloy Steel Pipes The benefits of alloy steel pipe include its tensile strength, yield strength, fatigue resistance,
Know more
Stainless Steel Pipes Stainless Steel Pipes Trio Steel Supply has an extensive selection of pipe fittings and flanges to fully complement our
Know more
Fittings Fitting Trio Steel Supply has an extensive selection of pipe fittings and flanges to fully complement our Know more

API 5L other PRODUCTS

PSL1 PSL1
API 5L Pipe
API 5L Line Pipe
API 5L Supplier
API 5L Pipe Price
Know more
Seamless Seamless
API 5L Pipe
API 5L Line Pipe
API 5L Supplier
API 5L Pipe Price
Know more
LSAW LSAW
API 5L Pipe
API 5L Line Pipe
API 5L Supplier
API 5L Pipe Price
Know more
DSAW DSAW
API 5L Pipe
API 5L Line Pipe
API 5L Supplier
API 5L Pipe Price
Know more

Related products

Carbon Pipes Carbon Steel Seamless Pipes Carbon steel is more commonly used than any other metal, and has long been admired for its versatility
Know more
Alloy Steel Pipes Alloy Steel Pipes The benefits of alloy steel pipe include its tensile strength, yield strength, fatigue resistance,
Know more
Stainless Steel Pipes Stainless Steel Pipes Trio Steel Supply has an extensive selection of pipe fittings and flanges to fully complement our
Know more
Fittings Fitting Trio Steel Supply has an extensive selection of pipe fittings and flanges to fully complement our Know more